By: Todd J. Zuercher
The Ford Bronco was introduced to the public in August of 1965 to
compete against Jeep's CJ-5 and International Harvester's Scout in the burgeoning
recreational four wheel drive vehicle market. The first Broncos were very spartan without
options such as power steering and an automatic transmission. The first models were
available only with a 105 hp 170 ci six cylinder derived from Ford's Falcon lineup. The
only available transmission was Ford's 3.03 three speed manual with a column mounted
shifter. Transmission ratios behind the six cylinder were: 3.41:1 first, 1.86:1 second,and
1:1 third. When the 289 V8 option was introduced in March 1966, the three speed manual
behind it had ratios of: 2.99:1 first, 1.46 second,and 1:1 third. The transfer case was a
Bronco specific Dana 20 with a low range ratio of 2.46:1. Unique to the models was a tall
shifter with a shift pattern matching that of the T-handle shifter, but with a J- handle
style ball mounted on top. Most '66s also had rear shock absorbers that angled forward in
front of the axle with stud mounts at the top instead of the later rear-canted eye mount
shocks. The Bronco, with a 92 inch wheelbase was offered in wagon, half cab, and roadster
configurations. The roadster option was not very popular and was discontinued after 1968.
Standard brakes were 11 x 2" front drums and 10 x 2.5" drums on the rear on the
small bearing(2780 lb.) axle and 11 x 1.75" drums on the large bearing(3300 lb.)
axle. All Broncos employed a Ford 9" rear axle and until 1971, a Dana 30 front axle
rated at 2,500 lb. Axle ratios were 3.50:1, 4.11:1 and 4.57:1(6 cyl. only). The standard
gas tank held 14.5 gallon with an optional 11.5 gallon second tank available. Options for
'66(including dealer installed accessories) included: Warn free wheeling hubs, snow plow
kits, winches, tachometers, Air Lift front auxiliary springs, trailer hitches, tow hooks,
etc. Most of the options and many others were included through the Bronco's twelve year
run. Production for the 1966 year totalled 18,200 units.
The Sport Package was introduced in 1967. This package included
bright finished horn ring, windshield drip, head and taillamp bezels, side window frames,
instrument panel trim and tailgate handle, cigar lighter, chrome-plated grille, bumpers
and front guards, red die cast F-O-R-D letters appliqued to the grille, and 15" wheel
covers. A bright trimmed hardboard headlining and vinyl floor mat were also added to the
Sport Wagon. A dual master cylinder with a split hydraulic system and self-adjusting
brakes was also new. Back-up lights were now standard and an 11.5 gallon auxiliary fuel
tank option was available. 16,100 Broncos were built in 1967.
Bumpers with curved ends and side marker reflectors immediately
distinguished the 1968 models from their predecessors. Locking front hubs, new inside door
handles and "soft" window crank knobs were other new options. This was also the
last year for the 289 V8 and the roadster option. 1968 production was 15,700 trucks.
1969 was a big year for the Bronco with production jumping to
19,200 units. The 302 V8 replaced the 289 V8. Two speed electric windshield wipers
replaced the vacuum units several months into the production run. Amber lensed parking
lights replaced the previously used white lens. The Sport models now had aluminum door
panel trim, pleated parchment interior, and a rear floor mat when the rear seat was
ordered. Some sources say the removable top feature was discontinued, although we
enthusiasts know better! The steering stabilizer became a standard feature along with
improvements in NVH.
Repositioned side marker lights and reflectors were the most
obvious change to the 1970 Broncos. The Sport Bronco became a model rather than an option
package. 1970 also saw the first application of evaporative emissions recovery systems
with gas tanks on models so equipped losing capacity to 12.7 gallons and 10.3 gallons in
the main and auxiliary tanks respectively. 18,500 Broncos were built in 1970.
The stout Dana 44 became the standard Bronco front axle early in
the 1971 production year, replacing the weaker Dana 30. New options included a remote
control left hand outside mirror, a new headliner for the pickup, and a heavy duty
radiator. The special edition Baja Bronco by Bill Stroppe and Associates was also
introduced this year. Stroppe took a Bronco wagon and added a roll bar, dual shocks front
and rear, Gates Commando tires, fender flares, larger tires, rubberized steering wheel,
bumper braces, power steering, automatic transmission, special nameplate, and red,white,
blue, and black special order paint. A total of approximately 650 Baja Broncos were
produced between 1971-1974. 18,700 Broncos rolled off the assembly line in 1971.
1972 was the last full year for the T-handle transfer case
shifter and the '302' emblem disappeared from the front fenders of V8 Broncos. This was
also the last year for the beloved half cab. The Ranger trim package was introduced at
mid-year and consisted of new stripes, argent grille, color-keyed pile front and rear
carpet, deluxe wheelcovers, woodgrained door trim panels, 'Ranger' tire cover,
cloth-inserted bucket seats and a fiberboard headliner. Gas tank size continued to shrink
with the auxiliary tank now holding 7.5 gallons. 1972 Bronco production totalled 18,300.
When the Bronco was introduced in the mid-sixties, its main
competition was the Scout 800 and the Jeep CJ-5, both spartan vehicles to say the least.
By the early seventies, with the introduction of the Chevrolet Blazer and the Scout II, it
became painfully obvious that the Bronco was beginning to fall behind the competition. In
1973, Ford finally answered the calls for modernization by introducing the C-4 automatic
transmission option and optional power steering. The C-4 had ratios of 2.46:1 low, 1.46
second, and 1:1 third. The power steering box was a Saginaw unit with 5.3 turns
lock-to-lock. The base engine was bumped from 170 to 200 cubic inches. The J-handle
transfer case shifter was introduced shortly after the model year began and the low range
transfer case ratio became 2.34:1. These changes helped push early Bronco sales to their
second best year ever: 26,300.
By 1974, the 200 c.i.d. six cylinder and 4.11 axles were no
longer available in California. A new emissions package was also introduced for California
Broncos. Some subtle changes were made mid-year to the J-handle shifter mechanism in
response to complaints of tough shifting. The transmission selector was lighted starting
in '74. 21,400 Broncos rolled off the assembly line in 1974.
Unleaded fuel engines and catalytic converters were the new items
added to the Bronco in 1975 in the face of increasingly strict emissions requirements.
Some sources also say that the cam timing on '75 engines was retarded to help with
emissions as well. Sport and Ranger models received the F-Series steering wheel for the
year. GVWs and ride heights were revised. Among the new options was an 800 watt engine
block heater for folks in cold climates. Bronco production shrunk to its lowest ever in
1975 with just 13,200 trucks produced.
The bicentennial year brought several key improvements to Ford's
sport utility, most notably the addition of long overdue power assisted front disc brakes.
The rear brakes were upgraded to 11 x 2.25" drums. The steering box ratio was
shortened to 3.8 turns lock-to-lock. The dreaded Y steering linkage was also introduced in
1976 along with a front anti-sway bar. A Specail Decor Group comprised of a flat
black-finished grille, tape stripe, bright windshield molding, and side window frames and
wheelcovers was introduced mid-year. 14,500 Broncos rolled off the line in 1976.
Everyone knew the early Bronco's days were numbered in the face
of stiff competition from the Blazer and Chrysler Corporation's Ramcharger and Trail
Duster trucks. The 1977 Bronco in many ways represented the best of the breed. There were
very few changes from the previous year; the most important one for enthusiasts being the
introduction of the heavy duty 9" rear end housing. The most obvious exterior change
was the introduction of gas tank doors replacing the previous exterior mounted caps, in
line with the introduction of doors on the F-Series and Econoline vans. The rear marker
lights were mounted vertically to give clearance for the doors. Some previously standard
items, such as a passenger's side seat and padded instrument panel, were made optional
this year. Unique to the '77s is a 14.4 plastic gas tank and an 8 gallon auxiliary tank.
In its final year of production, 30,700 Broncos rolled off the assembly line before the
large Bronco took over in 1978.
The early Bronco today enjoys a cultlike status among four wheel
drive and collector car enthusiasts alike. Its simple, sturdy construction, V8 power, and
excellent maneuverability ensure good off road performance and provide a platform on which
many modifications can easily be made. The popularity of the classic 1966-1977 Ford Bronco
will no doubt continue to soar in the years to come.