Home

Cfg. For Flt Ul III ONLY!!!!!!!!!!!!!!!!!!
1. To setup Cfg. in Flt Ul III.
2. If you don't know how to do this get someone that DOES!!!!!!!!!!!
3. Go into the Program Files folder.
4. Open the Flight3 folder.
5. Save old Cfg.(flt3) to a 3.5 disk. if you have to go back you can.
6. Open flt3 (right click)
7. Copy new flt3 and save.

8. You can highlight (Hold down left mouse botton. Drag over top.) then ( Ctrl+C) the Cfg. below this will save the Cfg..
9. Then copy to flt3 folder (Ctrl+V). Close folded it will ask if you want to save it (YES)!
10. Start Flt Ul III. Clear sky or GOD knows what else. lol
11. Below is the new Flt3 Cfg. to replace the old one.

    ;no_splash
    language eng
    ; what training mode should we run ?
    ; new stuff
    terrain_delta_time 5
    maximum_cap 280000000
    use_haze_cache
    haze_cache_size 512000
    show_distant_mountains 1
    opt_wind_accuracy 1
    UsePuffCloudModels
    extra_airports
    ;ai_density_multiplier 0
    mouse_vanish 7
    no_brakes_message
    no_engine_message
    nomovie
    ;NoGrids
    ;Nice, non-blocky haze may be achieved with
    ;TerrainHazeMethod MT
    ;but probably with a small framerate hit.
    ;Nice, non-blocky haze may be achieved with
    ;HazeMethod Specular
    ;but few 3D drivers support it properly. You'll see things
    ;like black clouds if your driver doesn't handle it.
    ;If your 3D driver can handle single-pass blending
    multitexturing,
    ;remove the following line for framerate boosts during nighttime
    ;scenes.
    plane Beechjet
    airport 86wa
    region seattle
    CurrentLog DEFAULT.LOG
    default_weather default.wsd
    ; AI
    pattern_cap 10
    takeoff_cap 8
    ground_cap 20
    cam_mode 12
    mono_wrap
    mono_clear
    zoar
    forcefeedback_xmin 0.
    opt_pilot_voice 0
    opt_hw_acceleration 1
    opt_3dhw_last_hw 1
    opt_video_resolution 0
    opt_perspective 1
    opt_close_caption 0
    opt_aircraft_density 103
    ai_density_multiplier 0.7
    blackbox_autorec 101803
    ;the blackbox_real_time option will make your flight recordings stay in better sync with any .wav
    ; sound files they reference
    ;blackbox_real_time
    sky_NumLowLevelHazeProfiles 2
    haze_lowlevelhazelevel 0.1
    Xsky_UseLowLevelProfile 1
    sky_LowLevel1ScatterRedHW 1
    sky_LowLevel1ScatterGreenHW 0.999
    sky_LowLevel1ScatterBlueHW 0.95
    sky_LowLevel1ScatterRedScatterHW 0.2
    sky_LowLevel1ScatterGreenScatterHW 0.32
    sky_LowLevel1ScatterBlueScatterHW 0.4
    sky_LowLevel1OpticalDepthHW 800
    sky_LowLevel2ScatterRedHW 1
    sky_LowLevel2ScatterGreenHW 1
    sky_LowLevel2ScatterBlueHW 1
    sky_LowLevel2ScatterRedScatterHW 0.2
    sky_LowLevel2ScatterGreenScatterHW 0.32
    sky_LowLevel2ScatterBlueScatterHW 0.4
    sky_LowLevel2OpticalDepthHW 800
    qf_loc_is_airport 1
    no_approach_on_guard
    no_tower_on_guard
    beacon_brightness 2.5
    qf_loc_pos_x 0.
    opt_fair_weather_cumulus 1
    tape_strip_outside 0
    qf_loc_poi
    qf_loc_is_landing 0
    qf_loc_is_takeoff 0
    qf_loc_airport 25
    qf_loc_lat 0.0000000000000
    opt_coordinated_rudder 0
    opt_BDensity 5
    qf_loc_alt 0
    opt_terrain_detail 103
    qf_loc_pos_y 0.
    qf_loc_pos_z 0.
    opt_sun_moon_glare 1
    opt_enhanced_cumulus 1
    qf_loc_lon 0.0000000000000
    qf_loc_runway 0
    wx_severity 2.020227333e-038
    tape_strip_inside 0
    Lesson3FirstPageViewed 1
    haze_scale 63
    

12. You may add these two lines.If you do not like remove. punt_single_pass_multitexturing
    punt_vertex_fog
    

13. Mr. Tom Wunder Options Setup I use it my FPS are great. Thank you Tom. This is the best so far hands down for me. OK, here goes: Settings:
    800*600
    Perspective Perfect
    Dist MTN off
    Lens Eff off
    Terrain Detail low
    Gamma Corr about 45%
    Distance Clipping low 0% (or that cloud won't show up until your almost in it)
    Bld Dens 100% (I tried setting it down, yuck)
    Fair-Weather Cumulus on
    Enhanced Cumulus off
    Haze aabout 35-40%
    Cumuliform Variability about 85%
    " " Dist 100%
    The only thing I have changed in the config file: haze_cache_size 4096000
    I also added two lines to the config: no_brakes_message (I hate that message)
    mouse_vanish 4 (implements one of Fly!'s best features)
    Then to test: use the Lake go to quick flight, select Tacoma Narrows for runway 17 takeoff & load the top saved weather file "Fair Weather-Cloudy" Take off and turn left, head toward the downtown Tacoma buildings beyond the downtown pass over the port and right there over Fife is one huge mother of a cumulus - you will see it from 20 miles away as soon as you make your turn! I get 17fps over most of this - low point is 8-10 right over downtown. I have been using this scenario to test all sorts of setting... using the same flight and plane so as to be as scientific as possible (enough for me anyway). Thanks, Tom Wunder

    Links Flt II,III
    

    

    Sceen Shot Flt Ul III
    

    

    Sim Chat Room
    

    

    PC & 3Dfx Info page a must!
    

    

    PC Pilot's Club
    

    

    
    

    Fps Page Flt UL II
    

    

    FU II Cfg. setup & ATC
    

    

    This site is Recommended by Looking Glass.
    All trademark's and copyright's are acknowledged.

    Sorry your browser does not support plugins
    ( yanni.mid)