Research Projects | Publications | Technical Skills | ||||||||
|
||||||||||
1. Gupta, N., Kishore, Woldesenbet, E., Sankaran, S.; Studies
on compressive failure features in syntactic foam material; J. Mater. Sci., Vol. 36, No. 18, 2001,
4485-4491. 2.
Gupta, N., Brar, B. S., Woldesenbet, E.; Effect
of filler addition on the compressive and impact properties of glass fiber
reinforced epoxies;
Bulletin of Mater Sci., Vol. 24, No. 2, Apr. 2001, 219-223. 3. Gupta, N., Kishore, Sankaran, S.; On the Characterization of
Syntactic Foam Core Sandwich Composites for Compressive Properties; J.
Reinforced Plastics and Composites, Vol. 18, No. 14, 1999, pp. 1347-1357. 4. Gupta, N., Karthikeyan, C. S., Sankaran, S., Kishore; Correlation
and Processing Methodology to the Physical and Mechanical Properties of
Syntactic Foams with and without Fibers; Materials Characterisation,
Elsevier Science, Vol. 43, No. 4, 1999, pp. 271-277. 5. Gupta, N., Kishore, Murthy, C. R. L., Dwarkanath, A., Sankaran,
S., On the Associated Problems of using
Ultrasonic Imaging in Characterizing Closed Cell Rigid Foam and their
Sandwich Configurations; J. Non-Destructive Evaluation, Vol. 18, No.
3-4 1998, pp. 27-31. 6. Gupta, N., Woldesenbet, E., Kishore, Sankaran, S.; Response
of Syntactic Foam Core Sandwich Structured Composites to Three-Point
Bending; J. Sandwich Str. and Compos., accepted, in press. 7. Woldesenbet, E., Gupta, N., Vinson, J. R.; Determination
of Moisture Effects on Impact Properties of Composite Materials;
J. Mater. Sci., accepted, in press. 8. Gupta, N., Woldesenbet, E., Kishore; Compressive fracture features of syntactic foams – microscopic examination; submitted to J. Mater. Sci., accepted, in press.
1. Gupta, N., Woldesenbet, E.; Microscopic studies of
syntactic foams tested under three-point bending conditions; in
proceedings of ETCE-2002, Feb 2002, Houston, TX. 2. Gupta, N., Woldesenbet, E.; FEM Contact Analysis and Experimental Investigation of the Effect of Radius Ratio of Cenospheres on Syntactic Foams; 10th US-Japan Conference on Composite Materials, Sept 16-18, 2002 - Stanford University, CA, USA. 3. Gupta, N., Woldesenbet, E.; Modeling of glass cenosphere
filled epoxy composites; TMS Annual Meeting 2002, Feb 2002, Seattle,
WA. 4. Gupta, N., Woldesenbet, E.; Stress Concentration Factor
approach to analyze the Deformation and Fracture behavior of Particulate
Composites; in proceedings of ASC 16th Annual Conference,
Blacksburg, VA, Sept. 9-12, 2001. 5. Gupta, N., Woldesenbet, E.; Deformation and Fracture
Characteristics of Cenosphere filled Epoxies under Compressive Loading
Conditions; in proceedings of ETCE-2001, Feb 2001, Houston, TX. 6. Gupta, N., Woldesenbet, E.; Stress Intensity factor
approach for estimation of fracture behavior of cenospheres filled
polymers; TMS Annual Meeting 2001, New Orleans, LA. 7. Gupta, N., Woldesenbet, E.; Effect of Cenospheres
Incorporation on Deformation Behavior of Epoxy Composites; DoE EPSCoR
LS-LAMP Research Conference, Feb 2001, New Orleans, LA. 8.
Gupta, N., Woldesenbet, E.; Experimental studies on three
point bending of syntactic foam core sandwich structured composites;
TMS Fall Meeting 2001, Indianapolis, IN. 9. Gupta, N., Woldesenbet, E.; Effect of Filler Addition on
Mechanical Properties of Glass Fiber Reinforced Epoxies; TMS Fall
Meeting-2000, Oct 2000, St. Louis, MO. 10. Gupta, N., Woldesenbet, E.; Reinforced Syntactic Foam;
poster presented at International Metallographic Society Metallography
contest at TMS Fall Meeting-2000, Oct 2000, St. Louis, MO. 11. Gupta, N., Woldesenbet, E.; Modeling of Filler Containing Polymer Matrix Composites; Intellectual Gumbo, 1999, Louisiana State University, Baton Rouge. 12. Gupta, N., Kishore; Optimization of Void Content by the Introduction of Glass Fibers; COMPOSIT-98, Indian Institute of Technology - Kharagpur (India). |
||||||||||
Main | ||||||||||
Professional | ||||||||||
Personal | ||||||||||
Research | ||||||||||
Composite Materials | ||||||||||
Contact me | ||||||||||