Proceedings
Call_No. :
TS1121.I59 1998 B.1
Title:
1998 International Pulp Bleaching Confrence Book 1
Author:
June 1-5, 1998 Helsinki Fair Centre
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Chlorine Dioxide Bleachability of Pine Kraft Pulps Made with Controlled Liquor Concentration Profiles / Effect of Cooking Methods on the Bleachability and Surface Properties of Hardwood Kraft Pulp / The Influence of Cooking Conditions on the Bleachability and Chemical Structure of Kraft Pulps / Extended Oxygen Delignification / Extended Oxygen Delignification of High-Yield Kraft Pulp Correlation between Residual Ligning Structures and Bleachability by Oxygen and Chlorine Dioxide / Optimising Two-Stage Oxygen Delignification: Effects of Interstage Washing and Metal Ion Control / High-Yield Pulping and Bleaching Strategy for Aspen Kraft Pulps / Effect of the Pulping Process on Pulp Bleachability With ECF, Z-ECF and TCF Bleaching Squences / Understanding the Lignozym Process / TCF Bleaching of Laccase-Mediator-Treated Kraft Pulps / Fundamental Aspects of Rapid ClO2 Delignification of Conventional and Extended Modified Kraft Pulps / High Temperature ClO2 Bleaching of Kraft Pulp / Principles of Multi-Stage Bleaching of Softwood Kraft Pulp / Novel Kraft Pulp Bleaching Using Catalyzed Peroxide Treatments / Studies on the Radical Formation in Ozone Reactions with Lignin and Carbohydrate Model Compounds / Rate Process and Uniformity in Commercial High Consistency Ozone Blezching / Competing Electrophilic and Nucleophilic Reactions of Peracids / Experiences in the Use of Peracetic Acid in ECF and TCF Bleaching / Uronic Acids and Metals Control / Effect of Mechanical Processes on the Strength of Oxygen Delignified Kraft Pulp / Pulp Strength and Incidental Mechanical Treatment During Kraft Pulp Bleaching / Correlations between Chemical, Fibre and paper Properties of TCF and ECF Bleached Kraft Pulps / Influence on Pulp Quality During the Removal of Hexenuronic Acids / Evaluation of Ecological Risks Associated with the Use of Chlorine Dioxide for the Bleaching of Pulp: Scientific Progress since 1993 / Compounds Identified in Effluents from the Bleaching of Wood Pulp / Compounds Identified in Effluents from the Bleaching of Wood Pulp / Fate of DTPA Metal Comptexes during Modern Ozone and Peroxide Bleaching / Fractional Washing in TCF and ECF Bleaching - Mill / Ultrafiltration of Alkaline Filtrates to Maximize Partial Closure of ECF Bleach Plants / Closed Cycle Recovery of TCF-Bleach Filtrates in Integrated Kraft paper Production - Trends in Sweden / Mill Scale Experiences of a New Screenroom and Oxygen Stage Application / Steps toward Selecting a Bleaching Sequence in Aracruz' Modernization Project / A Modern Bleaching Concept: Experience and Eco Mill perspectives at Stora Skoghall / Metsa-Rauma Process - a Forerunner in TCF Quality / Problemsolving in Bleaching of Eucalyptus Pulp: A Mill Case / Mill Scale Application for Selective Hydrolysis of Hexenuronic Acid Groups in TCFz Bleaching of Kraft Pulp / Formation of Oxalic Acid in the Kraft Pulping Process of Metsa-Rauma
Call_No. :
TS1121.I59 1998 B.2
Title:
1998 International Pulp Bleaching Confrence Book 2
Author:
June 1-5, 1998 Helsinki Fair Centre
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Oxygen and Chlorine Dioxide Delignification of Compression Wood Enriched and Normal Pine Kraft Pulp. 1 . Differences in Delignification behaviour and Residual Lignin Structure / Attempts to Further Characterize the Structural Changes of Residual Lignin in O2 Bleaching / Characteristics of Bleached Hardwood IDE Pulp, a New Type of Ethanol Extracted Soda Pulp / New Kinetic Approach to Oxygen Oxidation of Lignin to Elucidate the Degradation of Carbohydrate due to the Co-Oxidation Mechanism during Oxygen Bleaching / Non Degrading Oxygen Bleaching / Pulp Line Technology and Overcapacity Effects on the Bleaching Chemicals Consumption - Case Studies / Differences inBleaching and Refining Response of Displacement Batch Hardwood and Softwood Caused by Pulping Conditions and Structure of Residual Lignin / Black Liquor in Kraft Cooks: Influence on Bleaching / Improved Bleachability without Primary fines / Electrochemical Delignification and Bleaching of Chemical Pulp / Upgrading of Coloured Waste paper by Ozone, Formamidine Sulfinic Acid and Enzymes / The Use of a Laccase-Mediator Stage in Bleaching of Eucalypt Kraft Pulps / Effects of Laccase Mediator Delignification on Fiber Properties / Hemicellulases in bleaching of Superbatch Pulps / Integration of D and Q Stages during Hardwood and Softwood Pulp Bleaching / Newly Developed Blecaching Technique, Dpcat Method for ECF Bleaching of Pulp / Ozaone based ECF Bleaching of Oxygen Delignified Kraft Pulp / Bleqching Softwood Kraft Pulp: Role of the Transition Metals Iron, Copper and Manganese in the D Stages / A Comparative Evaluation of Low AOX Bleaching Sequences / ECF Bleaching of Softwood Pulp Using only 5 to 15 kg of ClO2 as Active Chlorine / Optimizing the ECF Bleaching of a High Kappa North American West Coast Softwood Kraft Pulp / Ionization of ClO2 in Chlorine Dioxide Delignification Comparison of ECF Bleaching Sequences and Influence of pH and Carryover on Bleaching Results / Effects of Polypyridines as Peroxide Activators in TCF Bleaching of Kraft Pulps / Carbohydrates in Peroxyacetic Acid Bleaching / Stabilizers in Pressurized peroxide Bleaching of Kraft Pulps / Use of T.A.E.D in Pulp Bleaching / Gas-Phase Addition of Solvent to Ozone Bleaching of Softwood Kraft Pulp: Insights into the Cellulose Protection Mechanism / How to Suppress the Self Consumption of Active Oxygen Species by Hydrogen Peroxide. The Effect of Stepwise Hydrogen Peroxide Addition and High Oxygen Pressure on the Efficiency of Bleaching Reaction / The Effect of O2-Stage Kappa Number and Degree of Post-O2 Washing on the Rate of H2O2 Bleaching in and OQR Bleaching Sequence / The Second Generation of Polyoxometalate Delignification Agents for Effluent-Free Bleaching / Activator Assisted H2O2 Delignification / Influence of Ethylene glycol on Ozone Bleaching of Kraft Pulps / Use of Ozone as a Last Bleaching Stage / Effects of Pulp Consistency in Ozne Bleaching on Pulp and Effluent Characteristics / Reaction Products From Ozonation of Dissolved Carbohydrates / Polyoxometalates Catalysis as a New Trend in Oxygen Bleaching / Polyoxometalates promoted Bleaching of Kraft Pulp with Oxygen, Ozone and Hydrogen Peroxide. A Comparative Study / The Effect of fibre Width Distribution on Ozone Bleaching / The Complementary Effects of Peracetic Acid and Hydrogen Peroxide in a TCF Bleaching Sequence / The Specific Effect of EDTA in Pretreatment of Pulps with Low Content of Managanese / Peracetic Acid in Bleaching of Softwood Pulp / Thermochemical Modelling of PO-Bleaching / Recent Experiences of a New On-line Residual Peroxide Analyzer / Formation Mechanisms of Oxalate and Chemical-Consuming Species in TCF Bleaching / Reactions of Sterols in Pulp Bleached with Ozone, Peroxide and Peracetic Acid / Peroxide Stabilization at High Temperatures / An IR and fluorescence Spectroscopic Study of Holocelluloses from TCF Bleached Kraft Pulps / Oxygen and Chlorine Dioxide Delignification of Compression Wood Enriched and Normal Pine Kraft Pulp. 2. Direct Analysis of Residual Lignin Content and Structure from Pulp Enzyme Hydrolysates / Observation of the Bleaching Process with Differential Stainning of Fibres / Heat-and Light-Induced Chromophore Changes in Xylan Fractions from Birch / Use of GPC in the Detemination of Molar Massess for Lignins from Spent Liquors and Pulp fibres / Photo-Yellowing of TCF-bleached Sulphite Pulps / Heat and Light Induced Brightness Reversion of Bleached Chemical Pulps. Effect of Oxidized Groups / Surface Structure of Wood Microfibrils / Why Do ECF-Bleached Kraft Pulp Contain Organic Bound Chlorine? / Estimation fo Phenolic Hydroxy1 Content in Various Pulps / Environmental Fate of High Molecular Weight Chloroorganics Produced by Chlorine Bleaching (1). Development of a New Analytical Method by the Use of Pyrolysis Gas Chromatography / Comparison of Oxidative Alkaline Extraction Reaction's Impact on Pulp Properties and the Environment / Evaporation of Effluent from Peracetic Acid Bleaching: Effect of Feed pH on the Quality and Re-Useabiblity of the Condensate / Organic Material Dissolved in Process Liquors during TCF Bleaching / The Production of Sulphur-Free Alkali in a Kraft Pulp Mill by diffusion Dialysis / Analysis of Peroxy Compound Effluents by Capillary Electrophoresis / Recovery of Sodium Chloride from a Kraft Pulp Mill for Re-Use in Bleaching Chemical Manufacture / effluent Closure of Hardwood Pulp TCF Bleaching / Total Recirculation of ECF Bleach Plant Filtrates / Characterization of Effluents from Peroxide and Peracetic Acid Bleaching of Softwood Kraft Pulp / New Closeed-Loop Scrubber Technology Using High-Boiling Organics / Membrane Filtration of Bleach Plant Filtrates / Recovery of the Chelating Agents EDTA and DTPA from Pulping Process Solutions / Optimum Peroxide Bleaching of Mechanical Pulp / Novel Bleaching Sequences for the Production of High Brightness Mechanical Pulps / Bleachability of Softwood Mechanical Pulps with Different Lignig Contents
Call_No. :
TS1176.3.W6 C42 1997
Title:
1997 Chip Preparation & Quality Short Course : Atlanta, GA, August 11-13, 1997
Author:
Chip Preparation and Quality Short Course (1997 : Atlanta, Ga.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Global Fiber Supply / Roundwood Processing / Debarking / Chipping & Chip Quality / Chip Screening and Cleaning / Developments in Satellite Woodyards / Plywood Chips / Chips From Woodland Chippers / Sawmill Chips / Chip Quality Control / Why is Chip Quality Important to Pulp Mills? / Chip Handling and Storage
Call_No. :
TD899.P3 E583 1997 N.1
Title:
1997 Environmental Conference & Exhibit, Book 1
Author:
May 5-7, 1997 Minneapolis Convention Center Minneapolis, MN and Technical Association of the Paper and Pulp Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Beneficial Reuse of Mill Residuals / Permitting Co Emissions from Bleaching Operations at Pulp and Paper Facilities / Carbon Monoxide Emissions from Co Emissions from Oxygen Delignification and Chlorine Dioxide Bleaching of Wood Pulp / The Influence of pH on Resin Acid Solubility Related to Biodegradation Kinetics of Resin Acid in Pulp Mill Effluent / Congener Specific PCB Concentrations in Fish from the Fox River, Wisconsin, USA / Treatability and Variability of Marine Chronic Toxicity in Dissolving Sulfite Mill Effluent / Design of a Practical Environmental Management System to Meet ISO 14000 / ISO 14000 Implementation and Case Studies / A Low-Strength Sediment Cover Solution / A Novel Technology for the Operation and Control of Absorption Towers in Treating Chlorinated Compounds in the Pulp & Paper Bleaching Process / Municipal Wastewater Reuse for Industrial Applications: An Indian Experience / Pulp Mill TRS-VOC-HAPs Reductions (HVLC NCGs) Using Regenerative Thermal Oxidation (RTO) Technology / Nutrient Control in Pulp and paper Wastewater Treatment Plants Using On-line Measurements / Denitrification of a Pulp Mill Effluent Waste Water Treatment at Port Alice / The Effect of Water Reuse on Paper Machine Microbiology / In Situ Biosparging of a Large Scale Dissolved Petroleum Hydrocarbon Plume at a Southwest Lumber Mill / Environmental Issues Involving the International Siting of Wood Product Manufacturing Facilities / The Brownfields Approach to Redevelopment of Forest Products Facilities, Two Case Studies / National Project on Wood Utilization for Ecosystem Management / New Silvicultural Practices under Ecosystem Management / Utilization of Nontraditional Species / Beetle-Killed Spruce Utilization in the Kenai Peninsula / Flexographic Ink Washwater Treatment Using the Membrane-Drum Dryer Process / Recycling Treated Process Wastewater in Starch Adhesive at a Corrugated Packaging Plant / Starch Bast Management Practices in a Corrugated Packaging Plant / Plant Microbial Filter Wastewater Pretreatment System for Corrugate Operations / Reducing Wastewater Treatment Costs for a New Deink Mill Using Water Quality Modeling / Development of Site-Specific Dissolved Oxygen Criteria for a River that Receives / The Fenholloway Project: Reviving A River, Sustaining an Ecosystem, Building Partnerships / Improvements to the Pigeon River Following Modernization of the Champion International / ISO 14000: Current Status and Perspectives Relative to the Forest Products Industry / Assessment of Aquatic Biological Effects at 25 Canadian Pulp and Paper Mills / Feasibility of EPA's Advanced Technology Tiers / Preliminary Results from the NCASI 1995 Wastewater and Solid Waste Survey / Permitting of a Steam-Heated Lumber Dry Kiln / New Particle Dryer Design Reduces Emissions and Eases Permitting Process / Implications of Title V for Corrugated Container Facilities / Biofilter Eliminates More Than Just VOCs from a Press Exhaust / Retrospective Permitting for RACT and MACT Compliance at an Northeast Pulp and Paper Mill / Determining Enforceability of Air Quality Requirements for the Title V Permit / CAA Title V for Pulp and Paper Industry Facilities: The Reality vs. the Perception / Effect of Tertiary Coagulation and Flocculation Technologies on Bleached Kraft Mill Effluent Quality / Comparison Between Ultrafiltration and Membrane Biological Reactor Treatment for Closure of Mechanical Newsprint Mills / Environmental Development with Increased Production: Use of Tertiary Treatment (DAF) in the Last Stage of the Wastewater Treatment System at Braviken Paper Mill, Sweden / Pilot Testing of Ozonation for Color Removal of Kraft Mill Effluent / Evaluating the Contribution of UF-Bonded Building Materials to Indoor Formaldehyde Concentrations in a Newly Constructed Single Family House / Field Validation of a Source Sampling Method for Formaldehyde, Methanol and Phenol at Wood Products Mills / Solid Wood Products Industry Health, Exposure, and Regulatory Issues / Strategic Groundwater Management: A Tool for Building Community Trust; Weyerhaeuser Company; Springfield, Oregon / Customized Data Management for Solid Waste Landfill Compliance Monitoring / An Expert System for Environmental Monitoring of Sanitary Landfills / Impact Assessment in Environmental Decision Making / Life Cycle Impact Assessment: Integrating Contemporary Exposure and Risk Assessment Principles / Monitoring Our Progress Toward Sustainability-Desirable or Undesirable? / Progress Report on the BFT Technology Demonstration: December 1996 / Responses of Fathead Minnows (Pimephales Promelas) and Ceriodaphnia Dubia during Life-Cycle Tests with Biologically Treated Kraft Mill Effluents / Modern Pulp Bleaching and the Aqueous Environment / Volatile Organic Compound Emissions from a Recycled Paper Mill / Preliminary Results from the Industry-Supported MACT III Sampling Program / Review of Metals Emissions Data for Kraft Mill Sources / New Approaches to Forest Sustainability / Joint Committee Meeting / Mechanical Properties of Spaceboard Panels and Pallets Made from Recycled Linerboard Mill Sludge / A Unique Approach to Solid Waste Reduction / Kraft Mill Waste Minimization for Total Recycle of Solid Waste and Byproducts / Retention of Calcium Carbonate during Recycling: Direct Loading Versus Fiber Loading Effluent Minimization and Air Emission Compliance in the Fully Integrated Kraft Pulp Mill / Using Process Integration to Approach the Minimum Impact Pulp Mill / Development of a Chemical Rating System to Prioritize Chemicals for Hazard Assessment and Risk Management / Minimum-Impact Mills: Issues and Challenges
Call_No. :
TD899.P3 E583 1997 N.2
Title:
1997 Environmental Conference & Exhibit, Book 2
Author:
May 5-7, 1997 Minneapolis Convention Center Minneapolis, MN and Technical Association of the Paper and Pulp Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Biomass Quality Management as a Process Control Tool for Activated Sludge Plants / Recent Changes in the Prevalence and Causes of Bulking Filamentous Bacteria in Pulp and Paper Mill Activated Sludge Systems / Process Troubleshooting and Optimizing a Pure Oxygen Activated Sludge Treatment System Oxygen Activated Sludge Treatment at Avenor Inc. / Improved Cl Ion Capture by Acoustically Enhanced Dry CaO Scrubbing / Biofiltration of ‡ - Pinene and Its Application to the Treatment of Pulp and Paper Air Emissions / Keys to Successful Power Boiler Predictive Emissions Monitoring System Installation / A Predictive Emissions Monitoring System (PEMS) for a Paper Mill Power Boiler / Progress in Sustainable Forestry / Development of the Kalamazoo Group Landfill: A Multi-Mill residuals Landfill / Environmental Assessment and Remediation at an Industrial Solid Waste Landfill / Landfill Redesign to Meet Subtitle "D" and Maximize Airspace / Wet Scrubber for TRS Control from A Brown Stock Washer / Odor Abatement Systems of the Modern Pulp Mill and Relative Importance of the Prevailing TRS Emission Sources / Design and Installation of a Replacement Thermal Oxidizer for Odor Abatement / Impact of Zero Discharge Implementation on Wet-End Retention at Recycled Fiber Board Mills / A Comprehensive Approach to Maximizing Paper Machine Productivity in a "Closed Water" System / A Report on the Forest Products Industry's Contribution to Groundwater Preservation and Water Use Prepared for the Florida Pulp and Paper Association / Endocrine Disrupters: Risk Assessment, Regulatory Issues, and Research / The Evolution of Ecological Risk Assessment: U. S. EPA Proposed Guidelines as a Paradigm with Opportunities / USEPA's New Cancer Risk Assessment Guidelines: What They are and an Illustration (Chloroform) of How They can be Applied / Dike Containment Repair by Gravity Feed and Pressure Injection of Epoxy Grout to Prevent Fuel Oil Migration into the Subsurface at a Paper Recycling Facility in Dublin, Georgia / Effect of Chemical Spills on Treatment System Microorganisms / Improving Mill Power Reliability for Environmental Compliance and Increased Productivity / Improved Dewatering of Pulp and Paper Mill Sludges / New Wet Waste Dewatering Technology / Pulp Extrusion at Ultra-High Consistencies / Hazard Assessment Study for a Pulp and Paper Mill for RMP Requirements / Preparing Hazard Assessment at a Pulp and Paper Facility for EPA's Risk Management Program / EPA's Tscreen Model as a First Step toward Characterizing Accidental Releases of Chlorine and Chlorine Dioxide / Risk Management Program Modeling and Emergency Preparedness and Response Plans for the Pulp and Paper Industry / State Initiatives: Industry-State Cooperative Efforts / Wastewater Audit + Process Diagnostics - Successful Wastewater Treatment Plant Upgrade / A Successful Program for the Intermittent Operation of an Activated Sludge Extract as Nutrient Source for Activated Sludge System / The New Activated Sludge System at Stora Port Hawkesbury, Nova Scotia / Beyond Compliance: Forest Industry Experience with Project XL / Pursuit of a Project XL Agreement at a Totally Chlorine Free (TCF) Pulp Mill / Project XL: The Minnesota Experience / Project XL Weyerhaeuser Flint River Operations / The Environmental Leadership Program at Simpson Paper / Nitrogen Availability from Land Applying Pulp and Paper Mill Sludge / Land Application of Solid Waste / Demonstrating the Environmental Benefit of Land Application of Kraft Mill Biosolids / Sequencing Batch Reactor Technology: An Old Technique Successfully Applied to the Treatment of Pulp and Paper Mill Effluents Containing High Residuals of Sulphite / Hybrid AST Process to Control Solids Upset in an Aerated Lagoon, Part I: Solids Upset in Aerated Lagoon / Accelerated Design and Start-Up of an SBR System for Groundwood Mill Wastewater / Implementation of the Great Lakes Initiative / Treatment of Excess White-Water and Coating Plant Effluent by Modified Polyethersulfone Ultrafiltration Membrane / Biotreatability of COD from Process Areas at a Bleached Kraft Mill / Process Design Considerations for Upgrading Secondary Treatment Systems for Integrated Bleached Kraft Mills / Teaming to Perform an Effective Environmental Compliance Audit / Drafting One Integrated Emergency Response Plan to Meet all Applicable Plan Requirements: Regulatory Support Has Finally Arrived / Enterprise Applications for EH&S Compliance Management / Representative Groundwater Sampling Using Low-Flow Methods / Utilization of Lignin Degradation Compounds to Determine Groundwater Contamination from a Pulp and Paper Mill Landfill / Cooperative Development of Groundwater Monitoring Guidance in Oregon / Environmental Applications of Horizontal-Directional Drilling / Great Lakes Initiative: Industry Perspective / Biological Treatment III / Accelerated Biodegradation of EDTA in a Conventional Activated Sludge Plant under Alkaline Conditions / Treatment of Recycle Paper Mill Wastewater in Moving Bed Biofilm Reactors / results of Phosphorus Minimization Studies for Pulp and Paper Mill Activated Sludge Systems Located Around the Great Lakes / The Causes and Cures of Elevated BOD5 in the Secondary Effluent from a Kraft-NSSC Mill / Cluster Rule Panel and Roundtable Discussion
Call_No. :
TS1121.I57 1997
Title:
1997 International Mechanical Pulping Conference: Tomorrow's Challenges for Mechanical Pulps
Author:
Stockholm 9 - 13 June 1997
Publisher:
CPPA and TAPPI Formation
Contents:
Mechanical Pulp in Paperboard Packaging / Energy Aspects on Mechanical Pulp, Chemical Pulp and recycled Fibres / Tomorrow's Challenges for Mechanical Pulp / Alkaline Peroxide Mechanical Pulping and its Application for Newsprint / washing of Board-Grade Spruce CTMP to Low Resin Content / Experience with Peroxide Bleaching of Hight-Freeness CTMP / Use of New Oxidizing Agents (Peroxide Perborate Activated Peroxide) in the Refiner - A Route to High Brightness Pulp / Evaporation as a CTMP Mill Kidney / Measure ment of the Power Distribution in a Single Disc Refiner / Modelling of Mechanical Thrust in TMP Refiners / A Theoretical Model for a TMP-Refiner / Optimizing the Refining Conditions with On-Line Controls / Improved Quality Contror and Process Design in Production fo Mechanical Pulp by the Use of Factor Analysis / Quality Control of High Consistency Refiners / The Alteration of the Wood Fibres in Refining / Objectives and Constraints for Pressure Screen Fractionation / Role of Mainline Screening Accept and Refined Reject in Fibre Roughening in LWC Papers / Fibre Fractionation - A Way to Improve Paper Quality / Efficient Paper Machine Operation with Tailormade Mechanical Pulps - The Kaipola Perspective / On the Generation of Structural Damage in Wood by Cyclic Compressive Loading / Behaviour of Spruce Sapwood in Mechanical Loading / Compression Behaviour of Wood in Relation to mechanical Pulping / Influence of Seasonal Wood Variation on TMP Properties, Bleach Consumption and Newsprint Runnability / Experiences of Classifying Spruce for Tailormade Mechanical Pulps for Printing Papers / Tree and Fibre Selection for Optimal TMP Quality / Evaluation of Refiner Disc Speed, Plate Design and Consistency on High Pressure-Low Residence (RTS) TMP Pulps / A Two-Stage Refining Process to Save Energy for Mechanical Pulps / The Effect on Pulp Properties of Ion Exchange in Wood Prior to Refining / Commercialization of Biopulping: New Technology for Papermaking / Use of Alkaline Peroxide Mechanical Pulps(APP) in Printing Papers and Boards / Fibre Characteristics of Various Mechanical Pulp Grades / Interaction of Pulp quality and Papermaking - Effects on Sheet Structure and Linting / Mechanical Pulp Properties and Paper Machine Performance / LWC paper from PGW and TMP Pulps with Gap Formers / The Dual Demand on Fibres in SC-Papers
Call_No. :
HD9820.3.I57 1997
Title:
1997 International Pulp & Paper Directory, PPI
Author:
Publisher:
Miller Freeman Publications, San Francisco
Contents:
General Index / Pulp & Paper Mills / Paper Merchants / Industry Information Sources / Mill Grades / Market Pulp / Trade Shows & Conferences / Buyers' Guide / Buyers' Guide Index / Advertisers' Index
Call_No. :
TS1171.T3 1997 N.1
Title:
1997 Pulping Conference, N.1 October 19-23, San Francisco Marriott, San Francisco, CA.
Author:
Pulping Conference (1997 : San Francisco, California.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Alkaline Pulping Committee Papers / Pulp Bleaching Committee Papers / Fiber Raw Material Supply Committee Papers / Mechanical Pulping Committee Papers / Nonwood Plant Fibers Committee Papers / Fiber Recycling Committee Papers / Sulfite and Semichemical Pulping Committee Papers
Call_No. :
TS1171.T3 1997 N.2
Title:
1997 Pulping Conference, N.2 October 19-23, San Francisco Marriott, San Francisco, CA.
Author:
Pulping Conference (1997 : San Francisco, California.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Alkaline Pulping Committee Papers / Pulp Bleaching Committee Papers / Fiber Raw Material Supply Committee Papers / Mechanical Pulping Committee Papers / Nonwood Plant Fibers Committee Papers / Fiber Recycling Committee Papers / Sulfite and Semichemical Pulping Committee Papers
Call_No. :
TD899.W65 M56 1997
Title:
1997 TAPPI Minimum Effluent Mills Symposium, Proceedings : San Francisco, CA, October 23-24, 1997
Author:
Minimum Effluent Mills Symposium (1997 : San Francisco, CA) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Working Towards EcoBalance / Minimum Impact Mills: Issues and Challenges / Weyerhaeuser Company's - Project XL / Adsorption Isotherms for Divalent Metal Ions on Unbleached Wood Pulp/Solid Solution Formation Between Mg2+,Fe2+ and Mn2+ in Hydroxide, Carbonate and Silicate Solid Phases / Calcium Oxalate in Bleach Plant Filtrates / Oxalic Acid Formation During ECF and TCF Bleaching of Kraft Pulp / Closure of the EO Stage in the ECF Bleach Plant/Initial Learnings from the BFR Demonstration / Membrane Filtration in the Closed-Cycle Bleach Plant/Impact of Falling Film, Cross-Flow Green Liquor Filtration and Modified Kraft Cooking on Mill Closure at Louisiana Pacific, Samoa Mill / The Distribution of Non-Process Elements in Pulp Mill and Bleach Plant Process Streamrs / Filtration Properties of Green Liquor Sludge/Opportunities in Green and White Liquor Handling Towards Mim-Concept / An Overview of Various Strategies for Balancing Saltcake, Chloride, and Potassium Levels in an ECF Kraft Mill/ECF Bleaching for Meeting U.S. EPA Cluster Water Rules with Conventional Cooked Kraft Softwoods/Cluster Rules Compliance and Advanced Technologies - Mill Application and Operating Experience / Application of Modular Computer Simulation to Aid Development of Pulp and Paper Mill Closure Technology: VOC Prediction / Evaluation of Bleach Plant Partial Closure for an Operating North American ECF Market Kraft Pulp Mill / Closing the Water Cycle of Pulp Mills by Evaporating Bleaching and Debarking Effluents / Solid Residues Generation and Management at Canadian Pulp and Paper Mills/Mill Closure-Decreasing the Solid Discharge / Energy-Efficient Closed-Cycle Bleaching / Extended Stripping and Usage of Evaporator Condensates at Varo Mill, Sweden / Mill Closure with enhanced Peroxide Stages/Minimizing BaSo4 Scale Formation in ECF Bleach Plants / Pitch Control in Pulp Mills / Impact of Pulp Mill Contaminants of the Wet End Chemistry of a Fine Paper Machine / Efficient Utilization of Resources in the Eco-Cycle Bleached Kraft Pulp Mill
Call_No. :
TS1200.A2 1997
Title:
Pulping and Paper Production: 97/98 Technical Information Papers
Author:
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Coating and Graphic Arts 0100 / Engineering 0400 / Paper and Board Manufacture 0500 / Pulp Manufacture 0600 / Process and Product Quality 0800 / Environmental 0900 / Finishing and Converting 1000 / Process Control, Electrical and Information 1100 / Nonwovens 1200
Call_No. :
TS1080.F86 1997 V.1
Title:
The Fundamentals of Papermaking Materials, V.1 Transactions of the 11th Fundamental Research Symposium held at Cambridge, September 1997
Author:
Fundamental Research Symposium (11th, 1997 : Cambridge, England), Baker, C. F. and Pira International
Publisher:
Pira International, Leatherhead, Surrey, United Kingdom
Contents:
Physical Properties of Fibres / Chemical and Physico-Chemical Properties of Fibres / The Properties of Pigments, Fillers and Binders / Properties of Sizing Materials / Papermaking Process Chemicals / The Structure of the Paper Sheet
Call_No. :
TS1080.F86 1997 V.2
Title:
The Fundamentals of Papermaking Materials, V.2 Transactions of the 11th Fundamental Research Symposium held at Cambridge, September 1997
Author:
Fundamental Research Symposium (11th, 1997 : Cambridge, England), Baker, C. F. and Pira International
Publisher:
Pira International, Leatherhead, Surrey, United Kingdom
Contents:
Physical Properties of Fibres / Chemical and Physico-Chemical Properties of Fibres / The Properties of Pigments, Fillers and Binders / Properties of Sizing Materials / Papermaking Process Chemicals / The Structure of the Paper Sheet
Call_No. :
TS1121.E36.1 1997
Title:
Use of Agro Fibre for Paper Production from and Environmental Point of View
Author:
Publisher:
NordPap
Contents:
Summary / Background / Life-Cycle Assessment (LCA) / Goal Definition and Scoping / Inventory Data / Inventory Results / Uncertainty Assessment / Impact Assessment: Classification and Characterization Results / Impact Assessment: Weighting Results / Conclusions
Call_No. :
TS1109.T26 1996
Title:
1996 Coating Conference Proceedings : Opryland Hotel, Nashville, TN, May 19-22
Author:
Coating Conference (1996 : Nashville, Tenn.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Printing / Coating Structures / Sensors / Basestock / Opticals / Coated Paperboard / Film Press / Runnability
Call_No. :
TD899.P3 I58 1996 N.1
Title:
1996 International Environmental Conference, N.1 Partners in Global Stewardship, Orlando, FL, May 5-8 : proceedings
Author:
International Environmental Conference(1996 : Orlando, Fla.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Analytical/Measurement, Analytical / Remediation, Pulp and Paper Industry / Landfill Closure: Case Studies / Building Products Facility: Environmental Management and Compliance / ISO 14000: Labeling LCA and Environmental Performance Evaluation / Remidiation, Solid Wood Industry / Mill closure and Process Improvement, Water Reclamation / Environmental Auditing Issues From Different Perspectives / Forestry BMP Programs / Pollution Prevention/Clean Air Act (112): Accidental Release Proposed Rule / Solid Waste Regulatory, Legal Issues / New and Emerging Technologies / Joint Committee Meeting / New Directions in Federal Regulations I / PSD, Regulatory Issues / Landfill Design, Technical Considerations
Call_No. :
TD899.P3 I58 1996 N.2
Title:
1996 International Environmental Conference, N.2 Partners in Global Stewardship, Orlando, FL, May 5-8 : proceedings
Author:
International Environmental Conference(1996 : Orlando, Fla.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Mill Closure and Process Improvement, Filtrate Recycle I / Air Emissions Control I / Product Stewardship and Life Cycle Analysis / Landspreading, Composting / Mill Closure and Process Improvement, TCF, ECF / Air Emissions Control II / New Directions in Federal Regulations II / Pulp and Paper Sustainability Practices / Emerging Air Quality Issues / Mill Closure and Process Improvement, Filtrate Recycle I / Receiving Water Quality / Regional Solid Waste Environmental Regulatory Issues: Agency and Industry Perspectives / Environmental Management / Air Quality Compliance Monitoring / Regional Regulatory Issues / Beneficial Reuse/Biological Responses / Poster Session / Sustainable Forestry Through Partnerships Among the Environmental Community, Industry, and Government / Air Quality Control Technologies / Analytical Issues / Advances in Biological Treatment Technology
Call_No. :
TS1176.6.B6 I55 1996 N.1
Title:
1996 International Pulp Bleaching Conference, N.1 Sheraton Washington, Washington, D.C. April 14-18
Author:
International Pulp Bleaching Conference (1996 : Washington, D.C.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Issues Shaping Future Bleaching Research and Development / Monitoring Bleached Pulp Properties / Advances in Oxygen Delignification / The Influence of Pulping New Developments in Ozone Bleaching / Mill Operations / New Concepts in Peroxide Bleaching / Closing the Cycle
Call_No. :
TS1176.6.S9 K72 1996
Title:
1996 Karaft Pulping Short Course : Red Lion Hotel - Columbia River, Portland, OR, May 5-8
Author:
Karft Pulping Short Course ( 1996 : Portland, Or.) and Technical Association of the Pulp and paper Industry, Atlanta, GA.
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Introduction to Kraft Pulping / Kraft Pulping Variables / Digester Operations / Continuous Digester Operation and Troubleshooting / Kappa Measurement & Digester Control / Kappa Variability Problem Solving / Pulp Strength / The Cluster Rule - What Does it Mean to Kraft Pulping
Call_No. :
TS1176.6.S9 K73 1996
Title:
1996 Kraft Recovery Short Course : Orlando, FL, January 8-11, 1996
Author:
Kraft Recovery Short Course (1996 : Orlando, Fla.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
The Kraft Recovery Cycle / Recausticizing Practice / Recausticizing principles / lime Kiln Principles and Operation / Black Liquor Properties / Principles of Black Liquor Evaporation / Optimizing Black Liquor Evaporators / Black Liquor Concentrators / Foul condensate Stripping / Non-Condensible Gas (NCG) Collection, Transport, and Incineration / Soap Separation and Handling Recovery Boiler Physical Principles and Design Criteria / Combustion of Black Liquor Droplets / Black Liquor Spray Nozzles for Kraft Recovery Boilers / Recovery Boiler Chemical Principles / Fireside Deposits and Deposit Cleaning / Recovery Boiler Air Emissions and Emissions Control / Boiler Water Treatment Recovery Boiler Explosion Experience Modeling as A Problem Solving Tool / Fireside Corrosion Inspections of Black Liquor Recovery Boilers / Corrosion Inspection of Recovery Boilers
Call_No. :
TS1080.P28525 1996
Title:
1996 Papermakers Conference : Philadelphia, PA, March 24-27.
Author:
Papermakers Conference (1996 : Philadelphia, Pa.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Papermakers Grade Discussion Groups / The Impact of Recycling and Mill Closure on Drainage and Retention / Advances in Paper Surface Treatment and Surface Property Measurement Techniques / Recycled and Mechanical Pulp Fillers / Refining / End Use Requirements from the Customer's Perspective Panel / Formation Improvement / Advances in Internal Sizing and Related Analytical Techniques / Trouble Shooting the Wet End / New Technology / Advances in Tetention and Drainage Technology / The Effects of Mill Closure on Paper Mill Systems / Problem Solving Roundtable on Refining, Screening, and Cleaning / Recycling Mills Roundtable / Mechanics and Chemistry in Retention and Drainage: A Partnership Panel Discussion
Call_No. :
TS1120.5.R46 1996
Title:
1996 Recycling Symposium, Proceedings : New Orleans Convention Center, New Orleans, LA, March 3-6
Author:
Recycling-Symposium (1996 : New Orleans, La.) and Technical Association of the Pulp and Paper industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Startups - Stand Alone / Deinking I / Deinking II / OCCI / The Use of Recovered Fiber in Food Contact Grades Panel / Deinking III / Process Control / Toners, Stickies and Other Contaminants Panel / Recovered Fiber Mills / Chemistry I / Testing / Chemistry II / Equipment I / Research I / Equipment II / Research II / Equipment III
Call_No. :
TD899.W65 M56 1996
Title:
1996 TAPPI Minimum Effluent Mills Symposium, Proceedings
Author:
Minimum Effluent Mills Symposium (1996) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Opening Session / Recovery / Millwide / Fiberline / Membranes or Fiberline / Mill Experiences / Paper and Board I / Bleach Evaporation / Condensate Treatment / Silicon and Aluminum / Paper and Board II / Recovery II
Call_No. :
TS1200.A2.B1 1995 V.1
Title:
50th Appita Annual General Conference, V.1
Author:
The Technical Saaociation of the Australian and New Zealand Pulp and Paper Industry Inc.
Publisher:
The Technical Saaociation of the Australian and New Zealand Pulp and Paper Industry Inc.
Contents:
FAS (thiourea dioxide) Bleaching of RCF (Recycled fibre) Pulp / Adsorption of Cationic Starch on Eucalypt Pulp Fibres and Implications of Recycling / The Impact of Eucalypt Fibre Properties on the Optical Properties on the Optical Properties of Recycled Handsheets / Effects of Operating Variables on Ultrafiltration of Flexographic Dispersions / Controlling Residual Deinking Chemical Carry Over to the Paper Machine / An Approach to Clean Technology for Mineral Recovery in the Deinking Process / Effects of Enzymatic Modification on Radiate Pine Kraft Fibre Wall Chemistry and Physical Properties / Biopulping for Kraft Pulp of Pinus Radiate / Enzymatic Modification of Radiate Pine Kraft Fibre and Handsheet Properties / Recycle Paper Mill Trials using Enzyme and Polymer for Upgrading Recycled Fibre / Drainage Improvement of Recycled Fibre Backwater Following œ -Amylase Bio-Modification / Fibre Beating with Exzyme Pretreatment / Predictive Modeling- Fast Forward to the Future / Development of a Calorimetric Alkali Analyzer / Pan Palletizes in the Pulp and Paper Industry / Drying Strategies with Gas Infrared: Quality and Savings / Energy Optimization in Pulp and Paper Processing / What Happened? Highlighting Trends in Plant Data with CUSUM Analysis / Life Extension of Engineering Plant Through Managed Condition Assessment / Innovative Control an A/C Paper Machine Drive at Mataura Mill Leads to Higher Value Added Products / Financial Consequences of the Timing of Decisions / A Team is Born / How Science with Revolutionize Papermaking / The Hazardous Substances and New Organisms Legislation- What to Expect has no Significance / Effect of Enzymes on Improved Oxygen Delignification with Peroxymonosulfate Treatments / Evaluation of Metal Complexes as Potential Catalysts for Oxygen Delignification / Kinetic Independent Variables in Oxygen Delignification of Eucalypt Kraft Pulps / Chromophore Changes During Oxygen Delignification and Chlorine Dioxide Prebleaching / Effect of Fibre Properties on Ozone Bleaching of Oxygen Delignified Kraft Eucalypt Pulps at High Consistency / Mechanism of Cyanamide Activation of Peroxide Bleaching / Rapid Pressurised Peroxide Bleaching - A Cost Effective Technology to Achieve Full Brightness Kraft Pulp in Both ECF and TCF Sequences / The Reaction of Syringols with Chlorine Dioxide / Utilization of Chelate to Optimize the Hydrogen Peroxide Bleaching Process / Deinking - A Process to Understand / Wood Merchandising and the Emerging Competition for Pulpwood / Use of the Radially Divided Increment Core Method to Assess Pulpwood Quality for Eucalypt Breeding / Between Pulp Yield Family Differences in the Patterns of Longitudinal (with Height) and Radial Variation of Wood Quality Indices in six E. Nitens Trees / Vessel Distribution at Two Percentage Hights from Pith to Bark in a 7 Year Old E. Globulus Tree / Near Infrared Spectra and Chemical Compositions of E. Globulus and E. Nitens Plantation Woods / Eucalypt Wood Classification by NIR Spectroscopy and Principal Components Analysis / Growth and Kraft Pulping Characteristics of E. Grandis in Response to Fertilizer Near Gympie, queensland / Raw Materials for MDF Manufacture / Mass Deacidification of Acidic Paer Documents / Pulp and Paper Quality Management Systems - A Retrospective Look at the Human Element / A Real Live, Fourth Generation R&D Management Example ( the Experience of North Eucalypt Technologies) / Effect of Porous Structure of Coated Layer on Ink Setting / Applications of the Scanning Electron Microscope to the Study of Australian Newsprint Mills' Papers: Product Evolution-Development / The Effect of Pore Structures and Sizing on the Abdorption of Liquid by Paper / Prediction of Fractionation Efficiency for Pressure Screens / Third Stage Low consistency Refining of TMP for Newsprint-directory Grades / Statistical Theory of Chemical Pulp Refining - An Innovative Combined Approach / Experiences and Case Studies Relating to Consistency Measurement using Microwave Signal Velocity / consistency and Level Control Around a Continuous Wastepaper Pulping System / Relationships for Improving Hydrocyclone control
Call_No. :
TS1200.A2.B1 1995 V.2
Title:
50th Appita Annual General Conference, V.2
Author:
The Technical Saaociation of the Australian and New Zealand Pulp and Paper Industry Inc.
Publisher:
The Technical Saaociation of the Australian and New Zealand Pulp and Paper Industry Inc.
Contents:
Machine Concepts and Experiences with New LWC Coating Concepts / Correlation Between Laboratory Printability Testing and Commercial Printing / coated, Soft nip Calendered Mechanical Papers-Technology, Strategies, Quality and Cost-Effectiveness / Mill Experiences at Nippon Paper-Ishinomaki, Japan-The Production of Double Coated Paper / PCC Morphology and Particle Size Effects in Alkaline Paper / Predicting the Impact of Closuring the Water System in Paper Mills / Drysim: A Combined Audit & Simulation Tool to Improve Overall Dry-End Efficiency / Non Contact Drying Options Following Size Press Metering Coasters / Hot Air, Induction Heating and Hydraulic Actuators on a Calendar for Cross Directional Quality Improvement of Paper / Fibre Retention and Sheet Formation Modeling in Fourdriniers and Gap Formers / film Applicators / Modeling Drainage in the Wire Section of a Paper Machine / Solids, Resin and Element Mass Balances in A Thermomechanical Pulp Mill / Characterization of Lipophilic Extractives in Radiate Pine Woods, Bisulfite Pulps and Mill Pitch Samples / factors Affecting the formation and Control of Pitch Deposits in Newsprint Manufacture from Mechanical Pulp and Recycled Fibre / Effects of Long Fibre Enhancement on Radiate Pine Toplog Newsprint Properties / Chemimechanical Pulping of New Zealand Grown Poplar Clone I-214 / Development of TMP Fibre and Pulp Quality / Operating Experiences with a High-Consistency Bleach Plant for TMP / Chemimechanical Pulps from Poplar-Chinese fir Chip Mixtures / Experiences of TMP Refiner Control Based on an In-Line Consistency Measurement / relationships of TMP and Wood Properties of Radiate Pine Trees / Maple High Yield Pulp. Part 1: Its Properties and Application in High Quality Paperboard / Effect of Residence Time, Temperature and Speed on TMP Properties Produced from Radiate Pine and Black Spruce-Balsam Fir Furnishes / Paper Structure Measurements for Predicting Print Quality / Eucalypt Fibre Size Fractions: Modeling and Measuring Their Effect on Sheet Properties / Characterizing Network Changes in Paper under Compression in the Z-Direction: The Effect of Loading Rate and Fibre Cell Wall Thickness / Technique for Determining the Fibre Distribution in the Z-Direction using Confocal Microscopy and Image Analysis / Application of Atomic Force Microscopy to Studies of Eucalypt Fibres / Design of a Laboratory for Pulp Fibre Assessment / Method for Measuring Fibre Orientation on Paper Surface / Characterization of Eucalypt Fibre Surface using Inverse Chromatography and X-ray Photoelectron Spectroscopy / The Determination of Fibre Charge and Acidic Groups of Pinus Radiata MDF Fibre / Intra-and Interfibre Pore Closure in Wet Pressing / High-Vacuum Dewatering of Wood Containing Printing Papers / On line Measurement and CD Control of Coat Weight / Considerations When Purchasing a New Headbox / Application of a Polyacramide Drainage Aid on Australian Paper Maryvale Mumber 4 Machine / Stock Preparation Technology for Packaging Paper, the State of Process Technology and Development Trends / The Fibre Line of Today-Prepared for Tomorrow / soda Oxygen Pulping of Roselle and Kenaf / A Modern, Low Polluting Fibreline / A New Recovery Method for Split Sulfidity Pulping and ECF Bleaching / Diffusion Washing of Unbleached Kraft Pulps of Different Eucalypt Species / On the Role of Reaction by-Products in the Kraft Pulping Process / Ecological Sustainable Developments in the Japanese Paper Industry: the Efforts and the results / Towards Zero Effluent Pulp and Paper Production / Assessment of Air Emissions from a Pulp & Paper Mill / The Use of Dissovled Air Flotation to Clean Process Water / Peocess Optimization Using a Rapid Bio-Assay Method / Operating Experience of Anaerobic Effluent Treatment / The Effect of Humidity on Packaging Grade Paper Elastic Modulus Low Temperature and High Humidity Compression Strength of Linerboard / Characterization of Mechanical Pulp Fines by Means of Image Analysis / Measurement of Paper Formation / How to Optimize the Paper Machine with Ultra Sonic Technology / From Hole Detection to Image Processing and Information Technology / Kraft Pulp Fibre Property Prediction from wood Properties in Eleven Radiata Pine Clones / Handsheet Property Prediction from Kraft Fibre and Wood Tracheid Properties in Eveven Radiata Pine Clones / Inheritance of Tracheid Transverse Dimensions and Wood Density in Radiata Pine / Fibre Morphology and Paper Properties / The Influence of Basic Density and Pulp Yield on the Cost of Eucalypt Kraft Pulping: A Theoretical Model for Tree Breeding / Improving wood and Pulping Quality of Eucalyptus Deglupta / Wood Quality and Quantiative Genetics of Pinus Radiata Part V Wood Microstructure, Ultrastructure and Lignin Topochemistry / Microfibril Angle Scanning of Increment Cores by X-ray Diffractometry / Within-Tree Variation of Fibre Coarseness in Eucalyptus Grandis and Acaciamearnsii in Zimbabwe
Call_No. :
TS1200.A2.B1 1996 V.A
Title:
82th Annual Meeting, V.A Technical Section Canadian Pulp and Paper Association
Author:
Canadian Pulp and Paper Association.Woodlands Section
Publisher:
Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec
Contents:
A Statistical Model of Paper Breaks in an Integrated TMP-Newsprint Mill / A Critil Comparison of PRP and PP Brightening of Low-Freeness CTMP / New Rool Measurement and Control Technology Result in Better Paper Machine Perfomance / On-Line Tracer System to Improve Enzyme Performance / An Artificial Nenural Network Integrated Environment for Modeling and Simulation in Pulp and Paper Industry / Flaw Detection and Sizing Using Advanced Mechanized Ultrasonic Inspection Systems / TCF-Bleaching for Sulfite Pulps / Close Range Photogrammetry: The Future of As-Built Drawings / Beloit Corporation's New Pilot Paper Machine / The Impact of Paper on Ink Plate Interactions in Offset Lithography / The Influence of Forming Fabrics on the Retention and Drainage on Gap Formers / Flexible Roll Balancing / Gas Phase Ozone Bleaching, Part 1: Rate of Ozone Consumption in Agitated Contactors / Stabilization Mechanisms of Water Based Inks / Off-Line Paper Machine Analyzer Provides Improved Paper Machine Production, Effciency and Paper Quality / Simplified Bleaching: Environmental Advantages for Existing Bleach Plants / Do-Stage Control in ECF Bleaching and Mid-digester Kappa Measurement / A New Waste Conversion and Recycling Process / Slaker Control at James Maclaren / Predicting the Lon-Exchange of Kraft Pulps Using Donnan Theory / Kneader-Type Pulpers: Lab Test / Methods for Controlling Catalase in a Deinking Mill / Press Roll Pitch Deposition Problems Assoclated with the Use of Certain Clay Products in Newsprint Manufacture / Improvement of Printability of Mechanical Grades with Precalendering / The Effect of pH on the Optical Properties of Paper / Fluid Couplings vs Electronics in the Pulp and Paper Industry / Contrained Multivariable Control of a Wood Chip Reflner / Digltal Printing: The Future of Printing? / Upgrading Wastewater Treatment Plants with Economical On-Site Oxygen Supply / Bleaching of Mechanical Pulps in a Displacement / Is Your Aging Workforce a Time Bomb? / Oil Cleanliness Monitor for Predictive/Preventive Maintenance / Process Efflciency - The Big Picture / Successful Applications of Process Design Implications / Fibre Orientation Optimization / Temperature - Gradient Calendering: From the Laboratory to Commercial Reality / The Interactions of Calcium, Magnesium, and Silicate Under Peroxide Brightening Conditions / Wood Pitch Deposition: Aluminum Ions from Kaolin Plgments / High Brightness Bleaching of Softwood Kraft Pulps with Oxgen, Ozone and Peroxide / Pilot Fluidized-Bed Testing of Kraft Black Liquor Gasification and its Direct Causticization with TIO2 / Impact of Advanced Co-Generation Methods on Energy Demand in Mechanical Pulping / Effect of Moistening on Cross Sectional Details of Calendered Mechanical Paper / Optimizing Paper Machine Dryer Control - A Case Study / Spidercel Reactor Technology Improves Flotation Deinking Efflciency Oxygen Ozone and Chlorine Dioxide: Part I, / AcuMod - Slmons Photogrammetry: Discover the New Way to Get As-Built Information / Trenchless Plpeline Technology Facilitates Pulp Mill Maintenance, A Case History / Applications of Model-Bsded Tuning and Analysis Tools to Paper Machine Control / Process Energy Standards / Application of an On-Line Expert System to Optimize Dryers and Press Section at Domtar Windsor / Seamed Press Fabrics: A New Dimension of Benefits for Papermakers / ISO 14000 and 9000: Are They Compatible / Transient Fines Distribution During Broke Recirculation in and Integrated Newsprint Mill / Towards Closed-Cycle Kraft; ECF Versus TCF Case Studies
Call_No. :
TS1200.A2.B1 1996 V.B
Title:
82th Annual Meeting, V.B Technical Section Canadian Pulp and Paper Association
Author:
Canadian Pulp and Paper Association.Woodlands Section
Publisher:
Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec
Contents:
Etude Comparative de I' Operation d'un systeme de Bloreacteur a membranes et d'un Systeme de Boues Activitees Conventionnel Pour le Traitement des Effluents Papetiers / Adsorption of Modified Starches on Clay and Its Effect on Wet Coating Structure / Screening of TMP and SGW with Valmet Tap Pressure Screens at The Morske Skog/Saugbrugs Mll / Mesure dela charge Organlque des Effluents de Pates et Paplers par Respirometrie / Mechanical Pulping of Comnmercial Thinnings of Six Softwoods From New Brunswick / Successful Lo-Solids Cooking at Hinton / A Time-Dependent Model for a Single Disc Refiner Local Density Fluctuations / Rheology of Suspensions: The Use of Model Flulds to Simulate the flow Behaviour of Coating Colours / Treatment of Lagoon Sludge, Primary Clarifler Sludge and Bleach Plant Effluent by Supercritical Water Oxidization / Production Rate Effect on TMP Pulp Quality and Energy consumption / Optimization Residence Time, Temperature and Speed to Improve TMP Pulp Properties and Reduce Energy / An Optical Method for Monitoring Pulp fibre Surface Edvelopment During Refining / Zero Process Effluent Discharge Attained at St-Laurent Paperboard Inc., Matane, Quebec / A Comparison Between Peroxide Preoxide Prebleaching and Postbleaching Sequence of ONP with Alternative Chemicals: Chances and Limitations / Extended Nip Pressing of Paper Grades / The Characterization fo Press Roll Topography / Determination of Specific Heat For Dry Fibre Material / Magnetic Delinking of Office Wastepaper / Characterization of Refining Effect on Fibre Property By Image Analysis / Extending the Life of Synthetic Supercalender / Multiaxial Press Fabrics. From Evolution to Revolution / Munerical and Physical Modeling of coating Colors: Penetration Into a Paper Substrate / Optimization of a Short Dwell Time Applicator by the Finite Element Method / Laboratory Coasting Rig for Metering Size Press Studies / Alkaline-Ethanol Pulping of White Birch with Recovery and Reuse of Ethanol / Energy Savings Using Mdium Voitage Softstarts on Chip Blowers / Black Liquor Viscosity Control with a Flow Additive La Tuque Mill Trial / High Vacuum Dewatering on fourdriniers and Formers / Couch Roll Dewatering / Peak Load Control on TMP Refiners / Basis Weight Profiling Experience of the Concept IV-MH Headbox / Detection of Ortho-Quinones in Wood Using Confocal Laser Scanning Microscopy / Computer Simulation of Dry7ing Paper by Multiple Techniques / The Janus Concept - A Completely new Calendering Technology to Meet Future Market Requirements / Manufacture of Multiwall Sack Papers / Pressing and Drying Development / Application of Dryer Fabrics on Recycle Furnish Paper Machines / Effect of Adsorbed Transition Metals on Hydrogen Peroxide Bleaching of Thermomechanical Pulp / the mechanism of Fibre Passage Through Narrow Apertures: Wuantifying the Wall Effect / Effluent Toxicity Prevention and Reduction / A Global Overview of Film Applicators / The Theoretical Background to Lo-Solids Pulping / Mill Wide Information System at Slave Lake Pulp Corporation / Modelling Recovery Boiler Fume Chemistry / Principles and Application of a Method for Assessing Detailed Paper Surface Topography / The Canadian Blomass Fluld Bed (Can.B.F.B.) Demonstration Unit and Field Trials / Mechanism of Cellulose Protection in a Novel an Selective Ozone Pulp Bleaching Process / Selection and Design of a Primary and Secondary Paper Sludge-Fired Boiler / In Line Biological Process Water Treatment in Closed Circults of Paper and Board Mills / System and Equlpment Problems Associated with Variable Frequency Dryves in the Pulp and Paper Industry / Automated Roll Measurement, Documentation and Grinding Control Improve Paper Machine Performance / The First Installatio of HCR Technology in North America
Call_No. :
TS1117.6.C1 1996
Title:
Control Systems '96 Preprints
Author:
April 30 - May 2, 1996, Nova Scotia, Canada
Publisher:
SPCI
Contents:
Process Systems Management in the Pulp and Paper Industries: An Optimization Approach / Two Dimensional Methods for Machine Direction and Cross Direction Estimation and Control / Performance Analysis of Cross-Direction Process Control Using Multivariable and Spectral Models / Advanced Cross-Direction Control / Paper Machine Data Analysis Using Wavelets / Control Relevant Disturbance Modeling of Paper Machine Full Profile Properties Using Adaptive PCA / New Algorithms for Intelligent Identification of Paper Alignment and Nonlinear Shrinkage / Comparison of Mid-Ranging Controllers / RMPCT: A New Robust Approach to Multivariable Predictive Control for the Process Industries / Effectiveness of Deadtime Compensators for Basis Weight and Moisture Control / PID Controller Tuning Based on Finite Frequency Response Data / New Tuning Rules for PID Control / Robust PI Controller Tuning and Process Identification / Applying Model Predictive Control Principles to PID Tuning in a Pulp Mill / Paper Quality Controls by Utilizing New Consistency Measurement Capabilities / Headbox Control Using Multivariable PI Controller Implemented in Distributed Automation System / Headbox Modeling and Wet End Pressure Pulsation Analysis / A Dynamic Model for the Pressure and the Flow of Steam in a TMP Refiner / Distributed Parameter Model of a TMP Refiner / Modeling and Control of the TMP Process / Analysis of Variance for Multivariate Dynamic Systems with Application to Thermomechanical Pulping Processes / A Practical Approach to the Control of TMP Refiners / Analysis of a TMP Wood Chip Refining Process Using the PLS Algorithm / Subspace Identification for Dynamic Process Analysis and Modeling / Grey-Box Identification of the Continuous Digester / Measurement Selection Issues for the Model Predictive Control of a Kamyr Digester / Reducing Batch-To-Batch Variability of Pulp Quality through Model-Based Estimation / PID Controller Performance Assessment / A Mill Prototype for Automatic Monitoring of Control Loop Performance / Controlling Processes with Nonideal Valves: Tuning of Loops and Selection of Valves / Process Knowledge: The Key to On-Line Monitoring of Process Variability and Control Loop Performance / A High-Fidelity Dynamic Simulator As Life-Cycle Design Tool / Variability Propagation Through a Stock Preparation System: Implications for Process Control and Process Design / Dynamic Modeling and Control of a Hydrogen Peroxide Bleaching Process / Optimal Grade Changes / Dynamic Modeling of Paper Quality / Mill Experiences with "In-House" Expert Systems / Post D Bleaching Controls with 100% Chlorine Dioxide / Experiences with Applying Advanced Control Strategies
Call_No. :
TS1080.L54 1996
Title:
TAPPI/AF&PA/NCASI Life Cycle Assessment Symposium : Proceeding.
Author:
Methods and Application for the Forest Products Industry : January 24-28, 1996, Atlanta, GA.
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Welcome and Introductory Comments / Life Cycle Assessment: Threat or Opportunity? / Looking at Product Life Cycle from Different Positions / Before You Search for the Answer, Be Sure You Understand the Question / Life Cycles for Pulp and Paper / Political Aspects of an LCA About the Use of Graphical Paper in Germany / Sonoco's LCA Experience / International Paper's LCA Experience / Some LCA Activities Conducted by the Scott Paper Company / Lifecycle Inventory: A Guidance Tool for Product, Process and Package Development / Procurement Policy Changes Using LCA / Technical Introduction to Life Cycle Assessment / The Technical Feasibility of LCA Impact Assessment / Enhancements of the LCI Methodology to Reflect Forest Products Characteristics / Case Study: Realities of LCI Enhancements / Data Quality and Availability Considerations in Forest Products Industry LCI Studies / LCA and Eco-Efficiency in the Industrial Sector / An Honest Tale Speeds Best Being Plainly Told an NGO Perspective on LCA / The FEFCO Study on Transport Packing: Results and Limitations / Case Study-Life Cycle Inventory of WWPA Western Lumber / Influence of Allocation Alternatives in a Commercial Application of LCI / Application of Life Cycle Assessment to Buildings / U.S. Pulp and Paper Industry Problems with the European Union Ecolabel for Paper Products / Life Cycle Assessment as a Tool for Examining Used Paper Management Options / Is Recycling the Best Policy Option? Insights From Life Cycle Analysis / LCA of Distribution in Sacks / Life Cycle Assessment and Human Health: The ILSI Feasibility Analysis / Life Cycle Analysis Quo Vadis: the ISO 14000 Experience, The Areas of Research, Envisioned Applications and Uses
Call_No. :
TS1080.W45 1996
Title:
Wet End Operations Short Course : Orange Beach, AL, February 12-16, 1996.
Author:
Wet End Operations Short Course (1996 : Orange Beach, Ala.) and Technical Association of the Pulp and paper Industry, Atlanta, GA.
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Introduction to Wet End Operations / The Practical Aspects of Formation / The Structure and Properties of Paper / Stock Approach & White Water Systems / Stock Piping Principles and Their Effect of Paper Machine Performance / Proper Design of a Paper Machine Vacuum Systems / Modern Headboxes - Their Role and Capabilities in the Sheet Forming Process / Headbox Maintenance and Operational Problems / High Vacuum Dewatering / Practical Aspects of Water Management / Forming Fabric Design / Application Examples of Forming Fabric Types / Paper Machine Wet End Cleaning and Conditioning / Nature of Paper Variation / Cross Direction Control / Two-Wire Forming of Single Ply Sheets / Principles and Practice of Multi-Wire Machine Operation / Choosing Fabric Bearing Surfaces / Techniques to Extend Your Sense of Sight for Paper Machine Analysis / The Use of Back Scatter Gauge Based Drainage Data
Call_No. :
TS1109.T26 1995 N.1
Title:
1995 Coating Conference, N.1 Stouffer Hotel, Dallas, Texas, May 19-20
Author:
Coating Conference (1995 : Dallas, Tex.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Progress in Coating Technology I - Blade Coated Design and Use / Progressing Coating Science I - Process Modeling and Coating Structure Analysis / Coated Paper Printability / Coating Process Analysis / Progress Reports from Japan
Call_No. :
TS1109.T26 1995 N.2
Title:
1995 Coating Conference, N.2 Stouffer Hotel, Dallas, Texas, May 19-20
Author:
Coating Conference (1995 : Dallas, Tex.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Coating - Paper Interaction / Progress in Coating Technology II - Coating and Finishing / Progressing Coating Science II - Coating Surface Analysis and Components Interaction / LWC and Film Coated Paper Production / Coated Paper Conversion
Call_No. :
TS1118.F5 C65 1995
Title:
1995 Coating Fundamentals Symposium : Stouffer Hotel, Dallas, Texas, May 19-20
Author:
Coating Fundamentals Symposium (1995 : Dallas, Tex.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Coating Surface, Structure, and Printability / Coating and Printing: Interfacial Phenomena / Coating Processes: Fluid Dynamics
Call_No. :
TS1120.5.D45 1995
Title:
1995 Deinking Short Course : Red Lion Inn at The Quay, Vancouver, Wa, June 4-7
Author:
Deinking Short Course (1995 : Vancouver, Wash.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Current Background on National Recycling Situation / Wastepaper Grades / Introduction to Printing Technology and Ink Chemistry / Coatings in Deinking / Wastepaper Storage and Handling / Pulp & Paper Screens / Deinking Chemistry / Coarse Screening / Fine Screening / Effective Screening and Cleaning of Secondary Fibers / Efficient Contaminants Removal - The Key Role of Modern Tailing Screens / Slotted Pressure Screening at Southeast Paper Manufacturing Company / Slotted Screen System Evaluation at Garden State Paper / Centrifugal Cleaning / High Density Cleaners / Forward Cleaners / Through-Flow Cleaners / Deinking Washers / Flotation Deinking Technology / Dispersion and Kneading Systems / Bleaching Wastepaper / Contaminants / Stickies control By Detackification / A Survey of the Various Contaminants Present in Recycled Wastepaper White Water Systems / Methods for the Detection of Stickies in Pulp / Image Analysis: A Primer / Recyclable Pressure Sensitive Adhesives / Hot Melt Adhesive Removal in Centrifugal Cleaners / Deinking Water Filtrate Systems / Process Control and Quality Control / Reject Handling and Sludge Pressing / Deinking Systems
Call_No. :
TD899.P3 I58 1995 N.1
Title:
1995 International Environmental Conference, N.1 Marriott Marquis, Atlanta, Georgia, May 7-10
Author:
International Environmental Conference (1995 : Atlanta, Ga.), Technical Association of the Pulp and Paper Industry and European Liaison Committee for Cellulose and Paper
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
TAPPI Environmental Communications Panel Discussion / Analytical/Toxicity, Reduction / Forest Products' Solid Waste Issues / Title V: Emission Community Awareness / Recent Reuse, Recycle Developments / Wood Products / Aerobic: General / Title V Operating Permits Regulatory Panel / Environmental Partnership and Pollution Prevention / Great Lakes Issues Panel / Sludge Characteristics / Forestry, Building Products / Title V Permit Preparation Experience Panel / Issues and Concerns: Discussion with the Environmental Community / Receiving Water Quality I / ISO 14000: Emerging International Environmental Standards / Hormone Mimics in the Environment / Landfill Design, Sludge Reuse / Joint Committee Meeting / Fiber Use, Recycle / Organo-Chlorine / Aerobic I: Micro-Organisms / Sludge Dewatering, Energy Recovery from Pulp and Paper Wastes / HAP Emissions
Call_No. :
TD899.P3 I58 1995 N.2
Title:
1995 International Environmental Conference, N.2 Marriott Marquis, Atlanta, Georgia, May 7-10
Author:
International Environmental Conference (1995 : Atlanta, Ga.), Technical Association of the Pulp and Paper Industry and European Liaison Committee for Cellulose and Paper
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Legal Issues Facing the Pulp and Paper Industry / International/Innovative Aerobic Application / Beneficial Reuse of Pulp and Paper Wastes / Regulatory Issues/Sustainability I/Membrane Technology / Environmental Auditing / Water, Groundwater Management / Source Emissions and Controls / Sustainability II / Human Health Issues / Poster Session / Hazardous Waster Issues for Pulp and Paper Mills / Receiving Water Quality II / Ecosystems Management, Environmental Effluent Issues / Reuse, Recycle / Pulping Bleaching / Mill Experiences with EPA Region IV on Causticizing Waste Management
Call_No. :
TS1176.6.M4 B1 1995
Title:
1995 International Mechanical Pulping Conference : June 12-15, Westin Hotel, Ottawa, Ontario, Canada
Author:
International Mechanical Pulping Conference (1995 : Ottawa, Ont.)
Publisher:
Technical Section, The Canadian Pulp and Paper Association, Montreal
Contents:
Selection of Poplar Clones for Thermomechanical Pulping / Various Poplar Species as Raw Material for Paper Grade Mechanical Pulps / The Influence of Wood Properties on the Quality of TMP Made from Norway Spruce / Effect of Water Jet Pulp Stone Conditioning on Mechanical Pulp and Paper Quality at Anjala Paper Mill / Precise Control of the Sharpening Burr Grooved Pulpstones: A Statistically Based Mill Evaluation / Basic Study of Pulpstone Dullness / Development and Verification of a Grinding Process Model Fibre Development durning Mechanical Pulp Refining / Delamintion of Stifffibres / Location of Fines in Mechanical Pulp Handsheets Using Scanning Electron Microscopy / Distribution of Lingnin an Other Materials On Particle Surfaces in Mechanical Pulps / Effect of Fines Quality on Paper Properties-New Aspects / Grey-Box Identification of a TMP Refiner / The Effect of Refiner Variation on Pulp Quality / On-Line Predictions of Physical Properties of Mechanical Pulp with Applications in Process Optimization / Disturbance Analysis of the TMP-Process / Alkaline-Peroxide Inter-Stage Treated Mechanical Pulp from Jack Pine / On the Interaction of Wood and Mechanical Pulping Equipment Part I: Fibre Development and Generation of Fines / On the Interaction of Wood and Mechanical Pulping Equipment Part II: Pulp Quality / Measurement of Pulp Residence Time in a High Consistency Refiner / The Influence of Production Rate on Refining in a Specific Refiner / Utilising the Ionic Properties of the Wood Polymers in Mechanical Pulping / TMP Furnish Development Strategies for Contrasting Fibre Types / Operational Experience with the First Commercial High Speed Refiner at Perlen Papier AG, Switzerland / Evaluation of the Impact of Refining Intensity on Energy Reduction in Commercial The Effect of Primary Stage Consistency / Thermopulp - A New Energy Efficient Mechanical Pulping Process / A Chlorite Holopulping Method to Evaluate Strength Changes in TMP/ TMP for SC-Grades- A Challenge in Fiber Modelling / Chemimechanical Treatments of Coarse Fibres - A Way to Reduce Fibre Roughening of TMP-Based LWC / TMP Long Fibre Fractionation with Pressure Screens / Groundwood Pulp Quality Improvements with Economical Benefit by Improved Screening Efficiency / The Effect of Rotor Speed on the Separation of Coarse Fibres in Pressure Screening with Narrow Slots / Operating Experiences with a High Consistency Bleach Plant for TMP / The Impact of Chemical Addition on Refining Parameters
Call_No. :
TS1121.I57 1995
Title:
1995 International Paper Physics Conference :
Author:
Niagara-on-the-Lake, ON, September 11-14
Publisher:
CPPA and TAPPI Formation
Contents:
Formation Hydrodynamics and Effects on Paper Physics / The Similarity Law of Formation / Characterizing Micro- and Macro-Mechanical Properties of Single Wood Fibers / Perspectives on Fibre Flocculation in Papermaking/Image Analysis Revisited: Paper Formation and Moisture Content Measurement from Wet to Dry /Mechanical Pulp Fines and Sheet Structure / Rapid Formation Performance Test / The Effect of Localized Dewatering on Paper Formation / The Wavelength Dependence of Transmitted Light Formation Measurement / A Device for Measuring Fibre Floc Sizes in Highly Turbulent Fibre Suspensions / The "Value" of Formation/The Propagation of Light in Paper: Modeling and Monte Carlo Simulations / High-Resolution Fibre Orientation and Basis Weight Measurement / The Three-Dimensional Structure of Paper: Methods of Analysis and Implications on its Physical Properties / The Effect of Fines on Fibres Bonding: Cross-Sectional Dimensions of TMP Fibres at Potential Bonding Sites/Mechanisms of Paper Shrinkage during Drying / Characterizing Network Changes in Paper under Compression in the Z-Direction / Changes of Fibre Dimensions during Drying / Delamination Resistance of Paper / Finite Element Analysis and Experimental Measurement of Strain Fields and Failure in Paper / Computational Study of Formation Effects on Paper Strength / Creep and Dynamic Testing of Eucalypt Paper and Fibres in Changing RH / Biaxial Hygroexpansion of Newsprint Paper / Mechanisms of Hygroexpansion of Paper / Effect of Calendering and Wetting of Paper Properties / A Method to Determine Heat Conduction in Paper during Calendering / Paper Friction - Influence of Measurement Conditions, Effects on Paper by Wet Pressing a giants a Thin, Elastic Rubber Blanket / Permeability and Specific Surface of Machine-Formed Paper / Effects of Wet Straining and Drying on Fibre Orientation and Elastic Stiffness Directionality / Floc Disruption in Medium-Consistency Fibre Suspensions: Empirical Results and their Interpretation / The Fracture Toughness of Paper: The role of Fibre Properties and Fibre Bonding / Handsheet Property Prediction from Kraft Fibre and Wood Tracheid Properties in Eleven Radiata Pine Clones / Response of the Kubelka-Munk Coefficients in Regions of Strong Absorption / Strength Properties of Paper Not Sensitive to Tackle Used for Beating or Refining / Numerical Experiments on Paper- Fluid Interaction-Permeability of 3-D Anisotropic Fibre NetWork / Simulation of Flocculation Monitor Flow / Multiple Component Analysis of Fibre Length Distributions / Simulating Paper Forming / Cross-Section Characteristics of Commercial Papermaking Pulp Fibres / Mathematical Modelling of Absorption Process of Aqueous Liquid into Paper / Influence of Newsprint Properties on Printing Press Web Tension-Impact of Tensile Stiffness / Drying-Induced Stress State of Interfibre Bonds / Elastic- Plastic Random Fibre Networks
Call_No. :
TS1080.P28525 1995
Title:
1995 Papermakers Conference : Chicago Marriott Downtown, Chicago, IIIinois, April 23-26, 1995
Author:
Papermakers Conference (1995 : Chicago, III..) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Papermakers Roundtable / Kinetic Aspects in Wet-End Chemical Interactions / The Effect of Environmental Trends on Wet and Dry Strength Additives / New Additive Treatments in Papermaking/New Technology in Papermaking I / End Use Requirements from the Customers' Perspective / Retention, Drainage, and Formation Roundtable / Gaining a Competitive Edge by Focusing on Stock Preparation / New Technology in Papermaking II / Impact of Secondary Fiber on Machine Runnability and Sheet characteristics / Balancing the Wet End While Reducing Papermill Effluent / Impact of Sizing on Print Quality / Deinked Market Pulp- A Panel Discussion / techniques for Monitoring of Retention and Drainage / Dyes, Fillers, and Pigments
Call_No. :
TS1118.P74 P73 1995
Title:
1995 Practical Aspects of Pressing and Drying Short Course : Fairmont Hotel, New Orieans, LA, March 27-31
Author:
Practical Aspects of Pressing and Drying Short Course (1995 : New Orleans, LA.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Press Design Review / The Influence of Pressing on Sheet Two-Sidedness / A Description of Sheet Stratification Caused by Wet Pressing / Practical Effects of Sheet Stratification Caused by Wet Pressing / Paper Defects Caused by Fluid Shear Force During Pressing / MD Microstriations in Paper: A Two-Sided Shrinkage Phenomenon / Design, Manufacture, and Maintenance of Roll Covers / Press and Dryer Fabric Cleaning, and Moisture Profile Management / Chemical Felt Cleaning / Vacuum Systems for the Press Section / Application of Drive Systems / Sheet Consolidation and Hot Pressing / Hot Pressing, (TAPPI Seminar Discussion 1988) / Optimizing Performance of The Press-Felt System / Troubleshooting the Press Section / Troubleshooting the Dryer Section / Techniques for Problemsolving in the Drying Section / Nature of Paper Variations / Overview of the Dryer Section / Sheet Control and Transfer in the Dryer Section Configurations and Fabric Requirements / Modern Dryer Fabric Design and Application / Design and Operation of the Dryer Drainage System / Yankee Hoods and Flotation Dryers / Paper Machine Hoods, Pocket Ventilation, Heat Recovery and Thru-Dryers / Profiling by Remoisturizing with Water Sprays / Alternatives in Drying and Profiling Applying Gas and Electric Infrared / Nondestructive Testing of Paper Machine Dryers / New Contamination Control Techniques for Paper Machine Lubricating and Hydraulic Systems
Call_No. :
TS1171.T3 1995 N.1
Title:
1995 Pulping Conference, N.1 Sheraton Chicago, Chicago, IL, October, 1-5
Author:
Pulping Conference (1995 : Chicago, III.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
AQ-PS Pulping / TCF Bleaching / Straw and Grass Pulping / Contaminants and OCC / Alkaline Pulping Process Control - Modeling and Kinetics / Bleaching Technology / Deinking Technology / Pulping Process Studies-I / ECF Bleaching I / TMP Strength and Energy / Nonwood Pulping I / Office Paper and Bleaching / Extending Delignification with AQ,PS for Hardwoods / ECF Bleaching II / Refining Technology
Call_No. :
TS1171.T3 1995 N.2
Title:
1995 Pulping Conference, N.2 Sheraton Chicago, Chicago, IL, October, 1-5
Author:
Pulping Conference (1995 : Chicago, III.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Nonwood Pulping II / Sulfite Air Emissions / Bleaching Technology II / Dealing with Oversized Chip / Nonwood Pulping III / Cluster Rule / Woodyard Issues / Recycled Fiber Papermaking and Process Water / New Equipment - Applications / Fiber Quality Issues / Bleaching Recovered Office Paper / Process Simulation / Pulping Process Studies II / Peroxide in Bleaching Futuristic Fiber Supply / Color Removal / Peracids and Bleaching
Call_No. :
TS1171.N56 1995
Title:
1995 TAPPI Global Fiber Supply Symposium, Proceedings
Author:
Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Global Supply Outlook / Sustainability / Recycling, Nonwood Fibers, and Fiber Farms / Supply and Demand
Call_No. :
TS1176.6.W6 C42 1995
Title:
1995 TAPPI, APA, CPPA & MOTAG-South Chip Preparation and Quality Short Course : Stouffer Renaissance Atlanta Hotel-Airport, Atlanta, GA, August 14-16
Author:
Chip Preparation and Quality Short Course (1995 : Atlanta, Ga.), Technical Association of the Pulp and Paper Industry., American Pulpwood Association., Canadian Pulp and Paper Association. & Millyard Operators Technical Group-South
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Wood Supply / Roundwood Processing and Storage / Debarking / Chipping / Chip Screening and Cleaning / Manufacturing Chips Off-Site / Chip Storage and Handling / Why is Chip Quality Important to Pulp Mills?
Call_No. :
TS1200.A2.B1 1995
Title:
49th Appita Annual General Conference
Author:
The Technical Saaociation of the Australian and New Zealand Pulp and Paper Industry Inc.
Publisher:
The Technical Saaociation of the Australian and New Zealand Pulp and Paper Industry Inc.
Contents:
MCCTM Pulping with Additives and Modified Sulfidity Profiles / RDH Kraft Pulping Process; Evolution and Current Status of Process Technology / Analytical Characteristics of Plantation Eucalypti Woods Relating to Kraft Pulp Yields / A computer Simulation of a Pulp Mill Washing Section / New Recovery Boiler Design for the Next Century / Liquor Concentration Measurement for Causticizer Control / Peroxymonosulfate and Dimethydioxirane as Interstage Treatments in Tow-Stage Oxygen Delignification / Oxygen Delignification - Process Considerations for Production of ECF/TCF Pulp / Effects of Medium Consistency Mixing on Radiate Pine Kraft Fibres / Measurement of Starch in Paper and Application to Investigations of Cationic Starch Adsorption / Charge Behavior of Eucalypti Kraft Pulp Determined by Polyelectrolyte Titration / Retention Improvements in Difficult Furnishes / Present and Prospective use of Silviscan for Wood Microstructure Analysis / A Micro-Raman Investigation of Wood Pulp Fibre Structure / Effect of Spiral Grain on the Measurement of Microfibril Angle in Eucalypti Increment Cores / An Approach to Customer Technical Services / Factors Influencing Linting in Offset Printing of Newsprint Information Services to the Pulp and Paper Industry / Survey of High Consistency Bleaching Technology for Mechanical Pulps / Optimization of the Peroxide Brightening of Mechanical Pulps using Soluble / Inhibition of Light-Induced Reversion of Thermomechanical Pulps using Ethylene Glycol Bisthioglycolate / Novel High Temperature Alkaline Bleach Boosting Xylanases / Effect of Modified Kraft Pulping on Enzyme-Assisted Bleaching / Screening White Rot Fungi for Their Ability to Biologically Bleach Eucalypti Kraft Pulp / TCF Bleaching of Eucalypti Kraft Pulp With Modern Sequences Involving a UV-Peroxide Stage / Elemental Chlorine Free (ECF) and Totally Chlorine Free (TCF) Bleaching of Eucalypti Kraft Pulps / Research Findings and Emerging Technologies for the Development of the Closed Bleached Kraft Pulp Mill / Chloride Management in a Closed ECF Bleach Plant / High Brightness recycled Fibre Trial at ANM Albury Mill / New Technologies in Oxygen Bleaching for Virgin and Recycled Fibres / PaperIQ - A New Concept for Paper Quality Measurement / New Headbox and Shoe Press Developments for State of the Art Writing and Printing Paper Machines / Operating Experiences of the Concept IV-MH Headbox / Reel imbalance - Its Causes and Cure / Improving Operating Efficiency at the Paper Machine Reel With a TNT-C / Wire Abrasion and Its Potential Causes / Process Modeling and Flowcharting Using Microsoft Excel / Cost and Quality Benefits Achieved as A Result of Partnering / A Modern Approach to Wet end Monitoring and control / Paper Quality Improvement Through Stock Preparation and Wet end Control / Eucalypti Hybrid Development for CCS Pulps / Kraft Pulp Qualities of Eleven Radiate Pine Clones / Models Relating Radiate TMP Strengt5h to Plantation Characteristics / Fibre Balance for the Australian and New Zealand Pulp and Paper Industry / Wood and Fibre Quality Objectives for Eucalypti Growers (Abstract Only) / Research Directions of the Pulp and Paper Industry in New Zealand / The Effect of Chip Compression On TMP Pulp Properties / Screening Lignin Degrading Fungi for Bionmechanical Pulping of Eucalypti Wood Chips / The DWS(Dilution Water Sulfonation) Process: The Effect of Pulping Conditions on Pulp Quality / Pattern of Variability of Wood Quality Indices With Height and Within Ring in 18 Year-Old / Best Practice and Benchmarking for Fluorescent Whitening of Paper / Web Inspection Systems / Tear and Scott Plybond Instruments Based on Kinetic Energy Measurement / A Stochastic Line Model for Paper Stiffness / A Simplified Shear-Lag Model of Paper as a 'Long' Fibre Reinforced Material / The Relationship Between Wood Pulp Fibre Properties and Fibre Cement Performance / Surface Energetics of Copy Paper / Near-Infrared Spectroscopy - A Valuable Tool for Pulp and Paper Research? / Light Absorbing Characteristics of Laser Inks in Bleached Eucalypti Sheets / Sheet Engineering: The Potential use of Fibre Fractionation to Improve Chemical Pulp and Softwood Kraft Pulp Blends / Research and Technological Developments Indication Change to Commonwealth Environmental Guidelines for New bleached Eucalypti Kraft pulp Mills / dioxin Measurement in Relation to the Commonwealth Guidelines for New Bleached Eucalypti Kraft Pulp Mills / comparative Toxicity of Effluents from ECF and TCF Bleaching of Eucalypti Kraft Pulps / Stochastic Models for Prediction of TRS ground Concentration from Kraft Pulp Mills / Environmental Life Cycle Analysis of some New Methods for Producing Bleached Pulps from Australian Eucalypti Woods / Activated Sludge Pilot Plant Treatment of Mechanical Pulp and Paper Mill Effluent / Environmental Assessment. Should You do it Yourself? / Analysis and Control of Resin Acids in Paper Mill Effluent and Their Dispersion in and Estuarine Environment / Bioaccumulation of Resin Acids in Rainbow Trout Exposed to Thermomechanical Pulping Effluents and Their Recipient Receiving Waters / Strength Development of Mechanical and Deinked Newsprint Pulps Through Low Intensity Refining / Stock Screening and Cleaning in Papermaking / Modeling Age Distribution of Waste Paper in Recycled Newsprint in the Western Pacific Rim Countries / P.T. Surya's New Deink Ledger, OCC and Virgin Stock Preparation Systems / Building the World's Most Modern De-inked, Mixed Office Waste Market Pulp Mill / Sizing Options for Waste-Based Paperboard / The Effects of Surface Properties on Removal of Various Types of Inks by Flotation / A Quick method of Estimating Colour, COD and BOD5 of a Pulp Mill Effluent / Deinkability of Aged Paper
Call_No. :
TS1200.A2.B1 1995 V.A
Title:
81th Annual Meeting, V.A Technical Section Canadian Pulp and Paper Association
Author:
Canadian Pulp and Paper Association.Woodlands Section
Publisher:
Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec
Contents:
Common DC Bus Supplies as a Part of AC Drive Systems / Possibility for Upgrading Woodcontaining Papers by Coating with a Metered Size Press / Specific Gravity and Chemical Properties of Wood from Commercial Thinning of Six Species of Softwood Grown on Plantations in New Brunswick / Pigmenting with Metering Size Press-A Pilot Trial Study / Solid Waste Reduction Achievements at a Fine Paper Mill / Case Histories of Two Large Nanofiltration Systems Reclaiming Effluent from Pulp and Paper Mills for Reuse / Improved Technology for Determining Maintenance Requirements of Motor and Generator Windings / Operating Experience of the Joint Scott Paper and Crabtree Municipality Effluent Treatment System / Steam and Condensate Diagnostic Expert System / Energy Management of Grinder Motors / Activated Sludge Treatment of Kraft Pulpmill Effluent / Continuing the Challenge "Blueprinting" a Headbox / Submerged Drainage: A New Concept in dewatering / Multi Ply Paperboard Forming- Pressure Forming Developments and Update / Multiple Re-Strikes Phenomenon When using Vacuum Circuit Breakers to Start Refiner Motors / Specifying a Motor for Use on an Adjustable Speed Drive / Soft Nip Calendering of Offset LWC-Supercalender Finish Comparison / L' Utilization des Residues de Pates et Papiers Dans la Fabrication de Materiaux Destines Aux Projets de Rehabilitation de Sites Degrades / The Effect of Paper Structure on Behaviour in a Calender Nip / Effects of Headbox Configuration and Forming Parameters on Paper Properties in Twin-Wire Rool-Blade Forming / The Development of Delignification and Lignin-Cellulose Selectivity During Ozone Bleaching / Dewatering and Consolidation of Wet Webs / New Pressing Technologies for Multiply Board / In-Situ Production of Polysulphide Liquor in a Kraft Mill's Causticizers / High Performance Drive Systems Utilizing Standard AC Motor / The Close-Cycle Sulfite Mill Development and Implementation / Advantages of Continuous Slot Screening in Broke Handling / Drying Paper with Superheated Steam / Kraft Continuous Digester Cooking Control / Eeffect of Basestock Formation on Paper Coating / Environmental Considerations for Landfill Development in the Pulp and Paper Industry / Secondary Treatment Startup Problems and How to Avoid Them / Simulation of Flow Complexities in Paper Coating MakeDown and Application Processes / The Application of Power Conditioners to Reduce Power Consumption / Fundamentals NMR Studies of Lignins: Energing Answers to Issues of Concerns in Relation to Pulping, TCF Bleaching and Yellowing / Anaerobic Photoreactions of Some Lignin Model Compounds / The Roles of Free Radicals in Paper Permanence and Colour Reversion: some Recent Physical and Chemical Insights / Pulse-Gradient NMR to Resolve Size Structure Relationships of the Components of Effluents and Lignin Derivatives / Wood Dust Classified as a Carcinogenic by IARC / Occupation Health Due Diligence: How Noranda is Responding to the Challenge / Evaluation of Disposal Alternatives for Bleach Plant Concentrates From Closed Cycle Systems / Stickies Control in Newsprint Application - Review, Mechanisms and Novel Approach / Experience of Film Press Pigmenting and Coating / Advances in Cross Direction Coat Weight Control / Consistency Profiling - A New Technique for CD Basis Weight Control / Building Block Technologies Which Build Toward Effluent-Free Operation for Retrofit of A Bleached Kraft Pulp Mill Including Technology and Economics / Extension of Canada's Softwood Market Pulp / Printing on Coated Paper: A Pressman's View / Trends and Developments in Application Technology for Value-Added Papers / The New Headbox Concept with CD Consistency Control
Call_No. :
TS1200.A2.B1 1995 V.B
Title:
81th Annual Meeting, V.B Technical Section Canadian Pulp and Paper Association
Author:
Canadian Pulp and Paper Association.Woodlands Section
Publisher:
Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec
Contents:
Hydrodynamic Smoothing in the Sheet Forming Process / sludge Characterization survey / Fault Detection for Pressure Screens / Improved, On-Line Analyzers to Characterize Pulp Suspensions / Benefits of On-Line Fiber Length and Width Index Measurement / Impact of Residual Deinking Chemicals on Newsprint Machine Runnability / Towards the Optimization of Multiple-Stage Bleach Processes: The Use of Statistical Screening Designs to Optimize the Process Conditions in Pulp Bleaching and in Particular Peroxide Brightening / A Stochastic Model for the Motion of Pulp in a Single Disc Chip Refiner / An Expert System for Control Loop Performance Analysis / Wasteful Preparation System / Fiber Quality Analysis-A New Approach / On-Site Generation and Use of Peroxyacids in Chemical Pulp Bleaching / The Impact of a Pulp Quality Monitor at Alberta Newsprint Company / Viscoelastic Modeling of Paper in a Calendering Nip / Survey of Xylanase Enzyme Usage in Bleaching in Canada / Release of Resins During Mechanical Pulping / Fibre Fractionation in Hydrocyclone / Computational Fluid dynamics Calculations for Flow in Hydrocyclones / Comparing Reducing Agents in a Pilot Scale ClO2 Generator: does Hydrogen Peroxide Measure Up? / Direct Advanced Steam Heating of Calender Rolls / Fibre Characterization Using Confocal Microscopy - Collapse Behaviour of Mechanical Pulp Fibres / Using a Storefront Exhibit to Promote Public Awareness / Di-Per Process-Time for a Change, Peracid Delignification and Bleaching / Pressurized Steam Drying of Sludge, Bark and Wood Chips / Competency in Process Control - Industry Guidelines / Elimination of Structural Resonance to Allow Paper Machine Speed Up / Wood Comminution and Material Flow in al Laboratory Chip Refiner / Case-based Reasoning for Intelligent Fault Diagnosis and Decision Making in Pulp Processes / An Experimental Study of a High Speed Slice Jet / Entrapment of Water-based Inks in Fibre Mats / Effect of Formation on Local Strain Fields and Fracture of Paper / Saltcake Free on Demand Chlorine Dioxide Generation System-O1 Generator / The "Stock Quality Monitor", A New Approach to Measuring Fines / Chelation Prior to Hydrogen Peroxide Bleaching of Kraft Pulps: An Overview / Runnability, Meeting Our Customers' Expectations / Advance Clarifier Design for Stringent Mill Effluent Requirements / Fountain Solution in Offset Lithography / Substitution of Chlorine Dioxide for Chlorine- Canadian Bleached Chemical Pulp Mills / Cppa Recycling Committee, Test Methods Sub Committee Report / R8-SVP-MeOH Efficiency Measurement / The Ring Dryer, A New Approach to Waste Reduction / Installation of Blowline Consistency Control Improves Mill Operation / Environmental Improvements at Grande Prairie and Ecosystem Response / Tours are and Effective Way of Improving Public Opinion of the Forest Products Industry. Who Says? / A New Technology for Wood Chip Fines Screening / Determination of Recycled Pulp Optical Properties From Sheet Inked Area / Energy Information Systems / Markets and Standards / Hardwood Vessel Picking and the Manufacturing Process Advanced, Open CD Control for Existing Measurement Systems / Pilot Plant Ozone Equipment / Energy Savings Demonstration Projects in the Pulp and Paper Sector / Suction Roll Shells / Perpetual Balancing of Gyroscopic Systems Anisotropically Restrained / Distribution of Dissolved Solids in the Pulp & White Water Networks of Integrated Newsprint Mills
Call_No. :
TS932.I57 1995 V.1
Title:
8th International Symposium on Wood and Pulping Chemistry, V.1
Author:
International Symposium On Wood and Pulping Chemistry (1995: Helsinki, Finland)
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Chemical Structure of Wood and Wood Components / Chemistry of High Yield Pulping / Latest Advances in Pulping and Bleaching Chemistry / Chemical Processing of Non Wood Materials / Photochemistry of lignocellulosic Materials / Analytical Methods in Wood, Pulping and Bleaching Chemistry / Surface Chemistry of Fibres / Dissolved and Colloidal Wood Components in Paper Making / Chemical Modification of Wood and Pulp / Chemicals and Byproducts from Lignocellulosic Materials / Environmental Chemistry in Pulping and Bleaching
Call_No. :
TS932.I57 1995 V.2
Title:
8th International Symposium on Wood and Pulping Chemistry, V.2
Author:
International Symposium On Wood and Pulping Chemistry (1995: Helsinki, Finland)
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Chemical Structure of Wood and Wood Components / Chemistry of High Yield Pulping / Latest Advances in Pulping and Bleaching Chemistry / Chemical Processing of Non Wood Materials
Call_No. :
TS932.I57 1995 V.3
Title:
8th International Symposium on Wood and Pulping Chemistry, V.3
Author:
International Symposium On Wood and Pulping Chemistry (1995: Helsinki, Finland)
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Photochemistry of lignocellulosic Materials / Analytical Methods in Wood, Pulping and Bleaching Chemistry / Surface Chemistry of Fibres / Dissolved and Colloidal Wood Components in Paper Making / Chemical Modification of Wood and Pulp / Chemicals and Byproducts from Lignocellulosic Materials / Environmental Chemistry in Pulping and Bleaching
Call_No. :
TS1176.4.N6 N650 1995 N.22
Title:
Nonwood Plant Fibers : Progress Report 22
Author:
Technical Association of the Pulp and Paper Industry. Nonwood Plant Fibers Committee. and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Selected papers from the 1994 Pulping Conference / Selected Papers from the 1995 Pulping Conference / Tables of Contents from the Nonwoods Sessions of the 1970 - 1995 Pulping Conferences / Subject Index from Titles of Papers from the 1970 - 1995 Conferences / Author Index from Titlesxs of Papers from the 1970 - 1995 Conferences
Call_No. :
TS1200.A2.B1 1994 V.A
Title:
80th Annual Meeting, V.A Technical Section Canadian Pulp and Paper Association
Author:
Canadian Pulp and Paper Association.Woodlands Section
Publisher:
Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec
Contents:
Application of Digital Technology to Analogue Drive Systems / Novel High resolution Image Analysis for Measuring Residual Ink in Pulp, Paper and Board / High Intensity Drying of Paper / The Challenge, Lapping a Headbox Apron Floor / Pressure Distribution Between Forming Fabrics in Blade Gap Formers: Thin Blades / Bleaching Processes for ONP-OMG, MOW, SWL and UB-OMG Deinked Pulps / Harmonic Analysis of Industrial Power Systems / Mechanical and Chemithermomechanical Pulps from Second-Growth Softwoods / Measurement of Paper Strain in the Nip of an Experimental Calender / Gas Infrared Drying: Update on Technology / Optimizing Press Section Performance Through Water Permeability Analysis Utilizing the Paprican Felt Permeability Tester / The Effect of D Stage pH on Effluent Quality: Characterization of Effluent Fractions from OD(EO) Bleaching of Softwood Kraft Pulp / Effect of Feed Rate on Refining / High Speed Double Disc TMP from Northern and Southern Softwoods: One or Two Refining Stages? / Le Traitement des Effluents par Voie Anerobie le Proceed Neyrtec - Metaflux / Vent Sizing for Chlorine Dioxide Decomposition in Low-Strength Tanks / The Zone Shower - Less Water for More Fabric Cleaning Efficiency / A Study of Air Flows in Single-Tier Pocket ant High Speed / Blade Screen for Improved Chip Thickness Screening / Modeling and Simulation of a CTMP Process / The Use of Talc to Control Stickies in Deinked Newsprint The Importance of Cheip Impregnation on Refiner Pulp Quality / ISA SP-50 Fieldbus Overview & Update / Industrial Site Decommissioning-Remediation: An Overview of the Issues / Compressibility and Flow Resistance of Porous Medium / Recent Developments in the Application of Xylanase Enzymes in Elemental Chlorine-Free(ECF) and Total Chlorine-Free (TCF) Bleaching / Energy Savings Using Fine Bubble Diffuser Technology / Low Temperature Deinking of Non-Impact Printed Office Waste. Results of Laboratory and Pilot Scale Trials of a New "Laser" Deinking Program / The Development of the Erco R10 Process / A New Reel for Today's (and Tomorrow's) Paper Machines / Improved TMP Stock Screening / Mill Trial Experiences with Xylanase: AOX and Chemical Reductions / Weyerhaeuser Improves Machine Runability with Vac-Roll Conversion in Dryer Section / Computer Simulation of Formation with FIBREMAT 3.0 / Cancer Research in the Pulp and Paper Industry; Why, How and to What Ends? / Bleach Plant Scrubber Survey / CHEMREC, A Commercial Technology for Black Liquor Gasification / A Pilot Plant Scale Comparison of PP and PRP Brightening of Low-Freeness CTMP / Recent Innovations in Advanced Finishing Technology / Modeling Brown Stock Washing Systems Using PCGEMS / Granite Roll Wear and Barring: The Domtar Windsor Experience / Emergency Shutdown Sequence for and :SVP-LITE" ClO2 Generator / Absenteeism in Canada: An Overview / Paper Machine Speed Up, Drive Considerations / The Evolution of PY Bleaching and Miramichi Pulp & Paper / FMRC Cable Fire TestingPresent-Future / Recycled Pulp Washing. Part. Comparison of Washing Equipment and Sub-Systems / Fine Paper Printing Problems / The Impact of the PGW Washing Stage on Bleaching Efficiency / IGT Lint Test Options for Mechanical Printing Papers / The Role of Control Valves in Process Performance
Call_No. :
TS1200.A2.B1 1994 V.B
Title:
80th Annual Meeting, V.B Technical Section Canadian Pulp and Paper Association
Author:
Canadian Pulp and Paper Association.Woodlands Section
Publisher:
Woodlands Section, The Canadian Pulp and Paper Association, Montreal, Quebec
Contents:
IVIC: A Novel Approach to Non-Condensabel Gas Handling / Simultaneous Firing of an Concentrated Non-Condensable Gas Stream in the Power Boiler and Kiln / Modern Methods and Technology for Recycled Fiber Utilization / Brownstock Washing Control at Northwood / Experience with Fine Bubble Diffusers at Boise Cascade, Fort Frances / Why Expert Systems? / Monitoring Composite Pulp Quality / The Use of and Enzyme Treatment to Improve the Evviciency of Shive Removal by Bleaching / Steam and Condensate Advisor / Reduction of Offset Linting- A Comparison of Six Mills / Strategies for Treating Mixtures of Bleach Plant Effluents and Waste Water Treatment Sludges by Supercritical Water Oxidation / Cationic Demand Survey of Papermachines: How Can We Measure and Use It? / R & D Opportunities for Improvements in Energy Efficiency to the Year 2010- An Overview / Anthraquinone and Anthraquinone Polysulfide Pulping for Extended Digester Delignification / Performance of Wet-End Cationic Starches in Maintaining Good Sizing at High Conductivity Levels in Alkaline Fine Paper / The Development of a Screw Feeder for Hogged Bark and Other Wood Refuse / Energy Audits in Mills / Application of Expert System to Supervisor Control / Cartapip®: A Biological Product for Control of Pitch in Pulp Mills / Knowledge Integration System for Slave Lake Pulp Corporation and Daishowa Peace River Mill / Economic Retrofit of Standard Size Presses to Metering Size Presses / Operating Experiences with a Bubbling Fluid Bed Boiler Firing Paper Mill Sludges and Biomass at United Paper Mills, Kaipola Plant, Finland / Simulation of Flue Gas Flow in the Upper Furnace of a Recovery Boiler / Prediction and Control of Pulping Processes Using Neural Net work Models / Betz Wet End Management Prorocess Improves Operations Through Process Variation Reduction / Chemical Recovery Technology for Future Fiber Production / Cross Direction Basis Weight Control on Multiply Board Machines / Roll Cover Failure Survey / Mechanical Wood-Pulps Network / Start-up and Operating Experience with Valmet Sym-Former MB On Fort Frances No.6 Paper Machine / An Ergonomic Approach to Accident Prevention in a Pulp and Paper Mill / A discussion of the Laboratory Tests for Evaluating Coating Runnability / Steam and Water Management in Pulp and Paper Mills / Polyurethane Cover Failures Suction Press Rolls / Third Party Logistics: Re-Engineering Supply Chain Management / A Way to Improve Package Strength and Quality / Applying Proven Technology to Eliminate Kraft Bleach Plant Effluents / Full Roll Tracking Systems on Personal Computers / Proposed Environmental Guidelines for US Mills / Excessive Wear of Granite Press Rolls / An Overview of A Russian Zero Discharge Unbleached Kraft Pulp and Paper Mill - Selenga Pulp & Paper Company / Operating Experience of a 3,300 Tons D .D.-Day Recovery Boiler
Call_No. :
TS1176.6.B6 1994
Title:
International Pulp Bleaching Conference
Author:
IPBC (June 13-16,1994 : Vancouver, British Columbia)
Publisher:
Technical Section, The Canadian Pulp and Paper Association, Montreal
Contents:
Effect of Dissolved Organic Material from Various Sources on the Efficiency and Selectivity of MC Ozone Bleaching / Bleach Plant close-up and Conversion to TCF: A Case Study Using Mill Data and Computer Simulation / Improvement of the Chelating Stage in a TCF Sequence When Closing Up the Bleach Plant / Metal Management in TCF/ECF Bleaching. Part 1: TCF Bleaching / A Comparison Between Acid Treatment and Chelation Prior to Hydrogen Peroxide Bleaching of Kraft Pulps / Behaviour of Residual Lignin in Kraft Pulp During Bleaching / Totall Chlorine Free bleaching with Dimethyldioxirane / OZP-Bleaching of Kraft Pulps to Full Brightness / Role of Pulp Metal Profile on Enzyme-Aided TCF-Bleaching / Effect of Hemicellulases on Unbleached Softwood Kraft Pulp / Effective TCF Bleaching of Eucalyptus to Market Brightness / TCF Bleaching of Conventional and EMCC Softwood Kraft Pulp / Medium-Consistency Bleaching with High Concentration Ozone Gas in the Paprican Pilot Plant and a Comparison with Laboratory Bleaching / Studies of High Consistency Ozone Delignification of Oxygen Bleached Pulps / Minimizing Pulp Degradation During Totally Chlorine Free Bleaching Sequences Including an Ozone Stage / The Use of Chronic Bioassays in Characterizing Effluent Quality Changes in a Mill Conversion to Increased Chlorine Dioxide Substitution / On the Nature of High Molecular Weight Effluent Materials from Modern ECF- and TCF-Bleaching / A Comparison of Chlorinated Phenolic Compound Concentrations and Loading in Bleach Plant and Treatment System Samples at Eight Mills / A Review and Assessment of the Ecological Risks Associated with the Use of Chlorine Dioxide for the Bleaching of Pulp / The Evolution of Pulp Bleaching Practices at Harmac Pacific / Modified Modern Clo2-Bleaching / Chloride Ions and the Formation of AOX in DC-Bleaching / Biobleaching Process Using Hyper Lignolytic Fungus, Strain IZU -154 and its Mutants / TCF Bleaching to High Brightness-Bleaching Sequences and Pulp Properties / Closing up a TCF Bleach Plant / Pressurized Hydrogen Peroxide Bleaching for Improved TCF Bleaching / Oxidative Bleaching Enzymes: The Next Generation? / The Effect of D Stage Reaction Time on the Characteristics of Whole Effluents and Effluent Fractions from D(EO) Bleaching of Oxygen Delignified Softwood Kraft Pulp / Energy Efficiency in ECF and TCR Bleaching / The German Approach to the Closed-Cycle Sulphite Mill-Development and Implementation / BFR: A New Process Toward Bleach Plant Closure / Novel Enzyme Treatment for Dioxin-Free Bleaching of Kraft Pulp with High Kappa Factor and Low ClO2 Substitution
Call_No. :
TS1176.4.N6 N650 1994 N.21
Title:
Nonwood Plant Fibers : Progress Report 21
Author:
Technical Association of the Pulp and Paper Industry. Nonwood Plant Fibers Committee. and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Chemimechanical Pulp from Reed and Its Bleachability / Nonwood Specialty Pulps / Kenaf (Hibiscus Cannabimus L.) Yield Components as Affected by Sewage Sludge Applications / A New Bamboo Pulp Mill in Thailand / A Review of Oxygen Pulping Conditions of Some Nonwood Plants Growing in Turkey / New Pulping Technology: A Reasoned Approach and Some Observations from Research / Optimization of Caustic - Carbonate Pulping of Wheat Straw for Corrugation Medium / Sugar Cane Bagasse Pulping Study for Linerboard and Corrugating Medium Manufacture / Applying Correct Raw Material Preparation Methods for Straw Pulping / Lime-Soda-Oxygen and Lime-Oxygen Pulping of Wheat Straw (Triticum aestivum L.) / Japanese Local Paper Mill Needs a Way to Survive; Kenaf is One of the Hopefuls / Kenaf Pulp Properties as a Function of Their Composition, Yield and Freeness / Chemical Recovery by Gasification of Non-Wood Pulp Liquors / A Concept of a Viable Alkali Recovery System for a Non-Wood Pulp Mill / Methanol Based Organosolv Pulping of Wheat Straw of Indian Origin / Improved Wet Bulk Storage of Bagasse for Newsprint Pulp Production - Part 1 / Developments in Handling Sugar Cane Basgasse for Newsprint Production / High Temperature Vapour Phase Cooking of Rice Straw and Bagasse / Organosolv Pulping and Paper Characterization of Fiber Hemp / Industrial Experience in the Manufacture of Cigarette Tissue Using Hemp Pulp / Kenaf Supply as Affected by nitrogen Application and Cultuvar Selection / Anthraquinone Pulping of Non-Wood Species / Agriculture - Based Pulp as Secondary Papermaking Fibres / Conversion Factors for SI Units
Call_No. :
TS1171.T3 1994 N.1
Title:
Pulping Conference, Book 1 Sheraton Harbor Island, San Diego, California, November 6-10
Author:
Pulping Conference (1994 : San Diego, Calif.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Condensation Reactions Between Wood Polymers During Kraft Pulping / Lignin Removal of Alcell Pulp by Washing with an Ethanol-Water Solution / High-Intensity Mechanical Pretreatment and High-Compression Screw Pressing for Deresination of Aspen Kraft Pulps / Extended Delignification with Oxygen and Hydrogen Peroxide in ECF and TCF Sequences / Pretreatment of Softwood with Sulfide-Containing Liquor Prior to Kraft Cook / HAC® s A Better Way to Handle Chips / The Impact of Log Diameter and Log Sample Location on Chip Size Distribution / Modern Scandinavian Woodhandling Technology-A Key to the Best Quality and Profitability in Pulping / In-Refiner Bleaching with Sodium Hydrosulfite: Thiosulfate, Sulfur Dioxide and Corrosion Control / High Yield Bleaching Upgrade at Boise Cascade, Steilacoom / Sequential Bleaching of Mechanical Pulp With Sodium Hydrosulfite / Availability of Kenaf Fibers for the U.s. Paper Industry / Use of Kenaf for Linerboard Quality Enhancement / A Few Technical Aspects of Pulp Production from Kenaf / Chemical Considerations in the Production of Linerboard from OCC / Development, Design, Construction, and Start-up of the New Occ Plant of Weyerhaeuser Paper Company in Springfield, Oregon / Relationship Between Concora, Ring Crush, Short Span Compressive Strength and Refining conditions / Optimization of the Prehydrolysis and Pulping Steps in ASAM Dissolving Pulp Production / TCF-Bleaching of ASAM Dissolving Pulps / Chemical Energy and Water Balance of ASAM Pulping / The Impact of RDH Extended Delignification on ECF and TCF Bleaching / Chip Thickness vs. Kraft Pulping Performance, Part 3: Effect of New Optimized Chip Quality on Continuous Cooking, Oxygen Delignification and Bleaching of Softwood Kraft Pulp / Pulp Strength Delivery Along Complete Kraft Mill Fibre Lines / Surface Deterioration of Refiner Plates for Themomechanical Pulping / Improved Refiner Plate Performance at Lake Superior Paper Industries / Trends in Performance at Augusta Newsprint / Sugar Paper Mills Complex for Economy - With Special Reference to India / Extended Delignification of Bamboo Pulp by Oxygen - A Mill / Upgrading of Old Corrugated Cartons to Bleached Pulp Using TCF and ECF Delignification and Bleaching Sequences / In Situ Formation of Formamidine Sulfinic Acid: An Oxidative-Reductive Bleaching Process for Recycled Fiber / Use of High Conversion Peroxyacids in Non-Chlorine Bleaching Sequences for Recycled Fibers / TCF Bleaching of ASAM Softwood Pulp - Determination of the Transistion Points Between Cooking and Bleaching and Within OZP Bleaching / The ASAM Green Field Mill Concept / Alkaline Pulping - Low Kappa Pulping - Mill Experiences / Pulp Bleaching - Problem Solving Workshop: Mill Problems-Solution in Chemical Handling / Fiber Raw Materials - In-Line Monitoring Within the Woodyard: Present and Potential Applications / Mill Experience in the Steam Evacuation of Refiners / Nonwood Plant Fibers - The Application of New Pulping Technologies for Non-Wood Fibers / Fiber Recycling - Stickies Quantification / The Effect of Soap Acidulation Conditions on Tall Oil Production / Pressurized Black Liquor Gasification - Future Technology for Bio-Electric Power Production and Recovery of Pulping and Bleaching Chemicals / The Design of Fluidized Beds for the Direct Alkali Recovery System / Peracid Delignification and Bleaching On-Site Peracids: Tools for Bleaching Strategies to Meet the Cluster Rule, and Considerations on How to Select Among Them / Metals Control in TCF Bleaching / Growing Eucalyptus in California for Pulp / Alternative Furnish for Making Corrugated Medium / Utilization of Smallwood Produces Environmental and Economic Benefits / Wood Quality and Energy Consumption in the Production of Refiner Pulps / The Relative Bonded Area (RBA) of High-Yield Pulps / Fibre Development in Chemimechanical pulp Refining
Call_No. :
TS1171.T3 1994 N.2
Title:
Pulping Conference, Book 2 Sheraton Harbor Island, San Diego, California, November 6-10
Author:
Pulping Conference (1994 : San Diego, Calif.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Stickies Collection and Quantification within a Production Environment / Fractionation Technology and its Applications / The Effect of Centrifugal Cleaner Consistency of Pressure Screening Efficiency Mill Scale TCF Bleaching of Hardwood Sulfite Pulp - Advantages and Drawbacks / Strategies for High Brightness, Low Effluent TCF Bleaching of Sulphite Pulps / Transition Metal Control for Peroxygen Bleaching a Sulfite Pulp / The Impact of Recent Pulp Mill Modifications on the Sulfur Content of Crude Sulfate Turpentine / Kraft Black Liquor Fractionation by Ultrafiltration Dollars, Not Sense - Capital Implications of the Cluster Rule / Improved Oxygen Delignification with Interstage Peroxymonosulfuric Acid Treatment. Part 2. Effect of Hydrogen Peroxide / The Preparation of Peracids for Bleaching / Effect of Defibration Prior to Peroxymonosulfate Pulping and Transition Metal Content of Fiberized Wood on Pulp Strength / offshore Fiber Supply / One Perspective of Fiber Supplies in the United States / A Survey of Southern Pulpmill Wood Yards / Advanced Screening Concepts of Different Groundwood Pulps for High Quality Printing Papers / Operating Efficiency and Specific Energy Reduction with Grooved Pulpstones / Water Jet - New Technique for Pulpstone Surface Control / reed Canary Grass - A New Nordic Papermaking Fibre / Utilization of Nonwood Based Ammonium Sulfite Waste Liquor in Small Scale Pulp Mills - Experiences and Problems / Bio-Refiner Mechanical Pulping of Bast Type Fibers / Particle Management: An Effective Stickie Control Approach / Quantification of Plastic in Pulp Slurries / TCF Bleaching of Mixed Office Waste Reduced Chlorine Usage in the Production of Sulfite Dissolving Pulp / The Effect of Consistency on Pitch Precipitation by Flotation / NIR Based Yield Estimation Semichemical Pulping / The Basic Drainage Properties of Chinese Wheat Straw Pulp / Impact of Biomass Potassium on Operation of Effluent-Free Agri-Pulp Mills / Selective Pulping of Non-Wood Plant Species: Pectin in and Between Fiber Cell Walls in Plant Tissue / Slaker Grits Washing / Pulp Bleaching - Mill Experience with ECF Pulp Production / Fiber Raw Material Supply - fiber Supply Options for the Pacific Northwest / Nonwood Plant Fibers - Development of New Products and Markets - As Applied to Non-Wood Fibers / Total Quality: The Supplier Evaluation Process / Extendign Delignification with AQ/Polysulfide / Polysulfide Pulping of Southern Pine and Southern Hardwoods Employing the Moxy and Green Liquor Crystallization Processes / P 100 TCF Bleaching of Softwood Kraft Pulps to High Brightness / Low AOX Process for Bleaching High Kappa Pulps;01 / A Bleach Plant With Presses / Fundamental Attributes as a Basis for Selection of a Wood Chip Size Classification Series / Chemithermomechanical Pulping of Second-Growth Lodgepole from Western Canada / Influence of Fibre Morphology and Processing on the Papermaking Potential of Softwood Sulphate Pulp Fibres / Comparison of North American, European, and Pacific Rim Deinking Technologies / Enzymatic Deinking in Comparison with Conventional Deinking of Offset News / Deinking Flexo printed ONP in the Flotation Stage
Call_No. :
TS1171.T3 1994 N.3
Title:
Pulping Conference, Book 3 Sheraton Harbor Island, San Diego, California, November 6-10
Author:
Pulping Conference (1994 : San Diego, Calif.) and Technical Association of the Pulp and Paper Industry
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Laboratory Simulation of Modified Kraft Cooking Systems - A New Cooking System Enables Independent Temperature and Liquor Transfer Programs / Kraft Pulping Process Model Derived from Relationship of the Residual Alkali concentration on Cooking Time or H-Factor / TCF Full Bleaching of Softwood Kraft Pulp: The Optimal Conditions for P* Hydrogen Peroxide Bleaching / Stabilization of Hydrogen Peroxide to Improve TCF Bleaching of Kraft Pulp / Peroxo Compounds in TCF Bleaching / New Technology for Chip Thickness Screening / Timber Management Guidelines for Linerboard Production in North-Central Arkansas / Accomplishment and Significance of Optimal Chip Quality / Optimized Low Intensity Post Refining: Lower Energy and Superior Pulp Quality / Bowater Carolina Adds Enhanced TMP Controls / Practical Experiences with Fiberline Optimization in a RMP-Newsprint Mill / Model Deinking Studies - Carbon Bleak Removal by Oil-Coated Plastic Beads / Controlling Yield in Washing Deink Systems / Yield of Fillers and Fibers in Froth Flotation / Gaseous Chlorine Dioxide Delignification of Softwood Pulps for High Brightness and Ultra Low AOX / Molecular Weight Distributions of Effluents from Chlorine Dioxide Delignification / Ozone-Based ECF and TCF Bleaching: Mill Experience, Laboratory Data, and Cost Considerations / Bear Island Start-Up of a Technically Advanced Newsprint Recycled Fiber Facility / Insights into Flexographic Newsprint Deinking: Laboratory and Pilot Scale Deinking Studies / Upgrading of ONP for LWC Grades / Alkaline Pulping - Mill Issues / Fiber Raw Materials - Measurement Methods for Chip and Log Piles / Fiber Recycling - Office Paper Deinking: Pilot and Commercial Mill Results / The Role of Metal Ions in TCF-Bleaching of Softwood Draft Pulps / Towards the Closed-Cycle Bleached Kraft Mill; Metals Management for Closed-Cycle Bleached Hardwood Kraft Mills / Clarifying the Flotation Cell Rejects: A Process Application to Close the Deinking Plant Water Circuits / The Recycling Behavior of Mechanical and High Yield Pulps Made From Aspen / A. Comporative Study of the Delignification Efficiencies of Alkaline Pulping Systems / Kraft Cooking with Split White Liquors and with High Initial Sulfide Concentration - Impact on Pulping and Recovery / Kraft Pulping with Black Liquor Pretreatment / Determination of the Spatial Distribution of Trace Elements in Jack Pine, Pinus Banksiana Lamb., by Imaging Microprobe Secondary Ion Mass Spectrometry / Beneficial and Adverse Effect of Metal Ions in ZP Bleaching Sequences Manage Your Metals with a Multipurpose Chelant / The Role of Print Layer Thickness and Cohesiveness on Deinking of Toner Printed Papers / Fibre-Toner Detachment Studies: Repulping and Flotation of Laser Printed Paper / Chemi-Mechanical Office Waste Deinking: Effect of Lower Grade Furnishes on Deinked Pulp Quality and Process Design / Cation Exchange of Metals on Kraft Pulp / New Process for Metal Ion Chelation at Elevated pH in Pulp Production / New High Efficiency Peroxide Bleaching Process and Its Use for ECF Sequences / Metal Management in ECF Bleaching and the Effect on Peroxide Efficiency in the EPO Stage
Call_No. :
TS932.I57 1993 V.1
Title:
7th International Symposium on Wood and Pulping Chemistry, V.1
Author:
International Symposium on Wood and Pulping Chemistry (1993 : Beijing, P.R. China)
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Biosynthesis and Chemical Structure of Wood and Wood Components / Chemistry of High Yield Pulping / Chemistry of Pulping and Bleaching / Chemistry and Chemical Processing of Nonwood Fibres
Call_No. :
TS932.I57 1993 V.2
Title:
7th International Symposium on Wood and Pulping Chemistry, V.2
Author:
International Symposium on Wood and Pulping Chemistry (1993 : Beijing, P.R. China)
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Chemical Modification of Wood and Pulp / Biological Treatment of Wood and Pulps / Photochemistry of Lignocellulosic Materials / Modern Analytical Method for Wood, Pulping and Bleaching / Chemicals and Byproducts From Lignocellulosic Materials / Biological and Chemical Aspects of Effluent Treatment
Call_No. :
TS932.I57 1993 V.3
Title:
7th International Symposium on Wood and Pulping Chemistry, V.3
Author:
International Symposium on Wood and Pulping Chemistry (1993 : Beijing, P.R. China)
Publisher:
TAPPI Press, Atlanta, GA.
Contents:
Biosynthesis and Chemical Structure of Wood and Wood Components / Chemistry of High Yield Pulping / Chemistry of Pulping and Bleaching / Chemistry and Chemical Processing of Nonwood Fibres / Chemical Modification of Wood and Pulp / Biological Treatment of Wood and Pulps / Photochemistry of Lignocellulosic Materials / Modern Analytical Methods in Wood, Pulping and Bleaching / Chemicals and Byproducts From Lignocellulosic Materials / Biological and Chemical Aspects of Effluent Treatment
Call_No. :
TS1080.F87 1993 V.1
Title:
Products of Papermaking, V.1 Transactions of the 10th Fundamental Research Symposium held at Oxford, September 1993
Author:
Fundamental Research Symposium (10th, 1993 : Oxford, England)
Publisher:
Pira International, Leatherhead, Surrey, United Kingdom
Contents:
Paper as an Information Carrier / Paper and Board as Stiff Structural Materials
Call_No. :
TS1080.F87 1993 V.3
Title:
Products of Papermaking, V.3 Transactions of the 10th Fundamental Research Symposium held at Oxford, September 1993
Author:
Fundamental Research Symposium (10th, 1993 : Oxford, England)
Publisher:
Pira International, Leatherhead, Surrey, United Kingdom
Contents:
Converting Challenges to Paper and Board (Review Paper) / The Effect of Coating Components and Fillers in the Recycling of Paper / Paper Beyond 2000
Call_No. :
TS1118.D7 1991
Title:
The Helsinki Symposium On Alternate Methods of Pap Drying
Author:
The Helsinki Symposium On Alternate Methods of Pap Drying(1991 : Helsinki, Finland)
Publisher:
Pira International, Leatherhead, Surrey, United Kingdom
Contents:
Present Methods of Pulp and Paper Drying / Press Drying, Impulse Drying and Condebelt Drying / Press Drying, Impulse Drying and Condebelt Drying (Cont.) / Superheated Steam or Air Drying Using Impingement, Pressure Difference Convection or the Coanda Effect / IR-Drying, Microwave Drying and Induction Drying / General or Novel Topics
Call_No. :
TS1080.F87 1990
Title:
Paper Technology : New Available Techniques and Current Trends, 24th EUCEPA Conference, May 8-11, 1990 Stockholm, Sweden
Author:
24th EUCEPA Conference (8-11 May 1990 : Stockholm, Sweden) and European Liaisons Committee for Cellulose and Paper
Publisher:
SPCI, Stockholm, Sweden
Contents:
Fabric Resistance at Initial Drainage / A Study of Fibre Orientation Related to Headbox Design and Operating Strategies / Further Insights into the Working Mechanisms of Fiber Dispersive Devices in the Sheet Forming Process / Dynamics of Sheetforming and the Effect on Paper Quality / Multiply Forming Concepts for Paper Board Grades / Comparison of Web Forming Techniques in Speciality Paper Making / Developments in Wet Pressing / Substitutes for Granite Rolls / Vacuum Felt to Increase Dryneww ing Wet Pressing / The Structure and Uniformity of Paper Machine Felts and Fabrics / The Valmet Sym-Belt and Sym-Belt s Presses / Developments in Paper Chemistry / Some Aspects of Microparticle Flocculation / Hydrosil A New Microparticle-Based Retention-De-Watering Aid System For Alkaline Paper-Making / Improving Paper Consistency and Quality Using A Retention Control Device / A New Method For Control of Pitch and Stickies Deposition in Papermaking / Amphoteric Waxy Maize Starch Use in Alkaline Papers / The Influence of Different Starch Modificates on Runnability in High Speed Coating / Polymeric Coagulant Structure-Activity Relationships in the Treatment of Coated Broke / Drying and Energy / New Applications of Infra Red Drying Technology / Dryer Design Concepts for Ultra Wide and High Speed Papermaking and Coating Operations / Gas Fired Paper Dryer / Analysis of Runnability Problems in the Paper Machine and Modern Concepts of Paper Drying / A New Method for Restrained Drying of Paper in Cross Direction / The Yankee Cylinder of the Soft Tissue Paper Machine: Construction and Casting Quality Effects on Production / Total Machine Concept and Considerations for Thru-Air Dried Tissue Paper / Recent Advances in the Application of Steam in the Finishing of Paper / Enhanced Calendering Technology through Appropriately-Designed Covers / Operating Experience with the Sym-Sizer Film Transfer Method / New Metering System Allows For High Speed with Billblade / Water Retention and Interactions in Coating Colors / Gypsum As A Coating Pigment - Experiences and Possibilities papermac- An Artificial Papermaker / New Winder Control Concept / Duo-Roller II-Single-Drum Winding Based on The Two-Drum Principle / Improved Printability-The Result of Systematic Machine Optimization / Optical Microscopy of Paper: Methodology & Applications / Printing Techniques in the Nineties; New Demands For Papermakers
Call_No. :
TS1080.E7 1990
Title:
Print : Paper and Board Products for Printing in the Nineties, 24th EUCEPA Conference, May 8-11, 1990 Stockholm, Sweden
Author:
24th EUCEPA Conference (8-11 May 1990 : Stockholm, Sweden) and European Liaisons Committee for Cellulose and Paper
Publisher:
SPCI, Stockholm, Sweden
Contents:
Market, Technology and Research Perspectives: Worldwide Perspectives / The Outlook For Printing Paper A Market Perspective / Marketing and Technical Development in the Comecon Countries / Efforts and Results in R&D-A World-Wide Review / Developments in the Graphic Arts Industry and Their Consequences for the Paper / Printing Quality, Requirements and Possibilities / Prospects of Printing Technologies-The Challenge by Electronic Printing Processes / Drucktechnische Perspektiven. Die Hearausforderung Durch Die Elektronischen Druckverf Ahren / Standards for High Quality Graphics on Linerboard / Newsprint 2000 / Development in Surface Finishing / Entwicklung in Der Oberflachenbehandlung / Surface Coating of Paper and Board Webs Through the Application of Clay Coating Colours, Coating Systems and Coating Line Concepts from The Viewpoint of the Equipment Supplier / SNC-The Supercalender of the Nineties Developments in Supercalender Technology / Dox Brush Finishing of Coated Board and Supercalendered Coated Papers / Paper Surface Enhancement at the Size Press / How to Adapt the Paper and Board Mill to Consumer Demands: Paper and Board Makers' Tools / The Water and Fibre Flow System in the Paper and Board Mill / Quality Assurance and Complete Quality Control / Enso-Gutzeit Summa Mill's and Printers' Experiences with Newsprint Made by the Roll and Blade Former / The Application of Gap Formers to Lightweight Coated Grades / Future Fiber Requirements or "The Same Quality as Last Year" / Possibilities and Limits When Utilizing Deinked Waste Paper Pulp as Newsprint Furnish / The Future of Aspen BCTMP / The Role of Softwood Draft Pulps in Printing and Writing Papers / Effect of Formation on Print Quality: Interdependence between Local Grammage and Print Density / New Pigments and Additives and Their Role in Modern Printing Papers / Trends in North America-the Use of Kaolin Pigments in Mechanical Pulp Containing Papers / Improved Print Quality-A Challenge for Internal and Surface Sizing / Starch as Stilt Material in Carbonless Copy Paper New Developments
Call_No. :
TS1080.F87 1989 V.1
Title:
Fundamental of Papermaking, V.1 Transactions of the 9th Fundamental Research Symposium held at Cambridge, September 1989
Author:
Fundamental Research Symposium (9th, 1989 : Cambridge, England), Punton, V. and Baker, C. F.
Publisher:
Mechanical Engineering Publications Limited, London
Contents:
The Beating of Chemical Pulps---the Action and the Effect / The Effect of Refining on Wet Fibre Flexibility and Its Relationship to Sheet Properties / Response of Pulp Fibres to Mechanical Treatment During MC Fluidization / Hydration of Refined Chemical Pulps Studied by Microwave Spectrometry / Effects of Pulp Drying and Refining on Softwood Fibre wall Structural Organizations / Overview of the Physics of Forming / Rapid Imaging of Mass Distribution in Paper by Electron Beams / Scaling, Percolation and Network Theories: New Insights into Papermaking / Applications of Flow Visualization Technique in Wet End Chemistry / A Concept for Fibre Flocculation in Turbulent Flow / Distribution of Fibre Orientations in Paper / Some Fundamental Chemical Aspects on Paper Forming / Confirmation of Adsorbed Polymers and Flocculation of Microcrystaline Cellulose and Pulp Suspensions / The Use of Potentiometric Titration and Polyelectrolyte Titration to Measure the Surface Charge of Cellulose Fibre / Exchange of Cationic Polymers Adsorbed on Cellulose Fibres and on Monodisperse Polystyrene Latex / Physicochemical and Hydrodynamic Aspects of Fines and Fillers Retention / Optimization of Pigment Performance in Paper
Call_No. :
TS1080.F87 1989 V.2
Title:
Fundamental of Papermaking, V.2 Transactions of the 9th Fundamental Research Symposium held at Cambridge, September 1989
Author:
Fundamental Research Symposium (9th, 1989 : Cambridge, England), Punton, V. and Baker, C. F.
Publisher:
Mechanical Engineering Publications Limited, London
Contents:
Wet Processing Research in 1989---an Historic Perspective, Analysis and Commentary / Compression Behavior of Fibre Mats in Wet Pressing / The Compression and Expansion of CTMP-Containing Sheets in a Wet Press Nip / An Integrated View of Web Consolidation Processes / The Physics of Impulse Drying: New Insights From Numerical Modeling / Throughflow Across Moist and Dry Paper / Drying Strategies and a New Restraint Technique to Improve Cross-Directional Properties of Paper / Mechanisms of Fibre Bond Formation / Review of Surface Application / An Evaluation of The Interaction Between Coating Colour and Base Paper By Coating Profile Analysis / Influence of Paper Morphology on short Term Wetting and Sorption Phenomena / Factors in the Blade Coating Process Which Influence the Coating Mass Distribution / Printing Roughness and Compressibility: A Novel Approach Based on Ink Transfer / Recent developments in the Technology and Understanding of the Calendering Process / The Development of Paper Gloss in Hot Calendering and Brushing / Modeling the State of Stress and Strain in Soft-nip Calendering / The Calendering Creep Equation---a Physical Model / Controllability of Papermaking / System Identification and Adaptive Control in Papermaking / Instability and the Papermaking Process
Call_No. :
TS1080.F87 1989 V.3
Title:
Fundamental of Papermaking, V.3 Transactions of the 9th Fundamental Research Symposium held at Cambridge, September 1989
Author:
Fundamental Research Symposium (9th, 1989 : Cambridge, England), Punton, V. and Baker, C. F.
Publisher:
Mechanical Engineering Publications Limited, London
Contents:
Guest Speaker's Address: "Change and the 21st Century" / Overview of the Physics of Forming / Discussion Contributions: Session 1 - 8, Conference Summary / Product, Process Analysis as Tools for Optimizing the Papermaking Process / Biographical Notes, Author Index, Subject Index
Call_No. :
TS1176.6.M4 I57 1989 V.1
Title:
International Mechanical Pulping Conference Helsinki, V.1 Mechanical Pulp-Responding To The End Product Demands
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
CTMP in Fine Papers / Mechanical Pulp as Coating Base Paper Raw Material. Strengths, Weaknesses and Development Needs / Pressure Groundwood (PGW), Super Pressure Groundwood (PGW-S) and Thermomechanical Pulp (TMP) in Woodcontaining Printing Papers / Single and Double Disc Refining at Stora Kvarnsveden / Experiences of TMP at Enso-Gutzeit Summa Mills / On the Use of Chemi-Mechanical Pulps in Fine Papers / A Low Energy Approach to the Manufacture of TMP for SC and LWC Grades / TMP Reject Sulfonation for Wood Containing Printing Papers / High Yield Pulps in Fluff Pulp of Today / Commercial Status of the Sulfonated Long fiber (SLF) Process / Alkaline Peroxide Mechanical Pulping, A Revolution in high Yield Technology / Peroxide Bleaching of Mechanical Pulps at High Consistency
Call_No. :
TS1176.6.M4 I57 1989 V.2
Title:
International Mechanical Pulping Conference Helsinki, V.2 Mechanical Pulp-Responding To The End Product Demands
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
High-Consistency Peroxide Bleach Plant with Subsequent Medium-Consistency Dithionite Stage / Chemithermomechanical Pulp at High Level of Brightness Obtained by the Bivis Process Associated with A Sulfonation in Reducing Medium / Two Stage Pressure Screening of RMP Pulp Using Turbo-Slot Baskets / Improvements on Screening Systems by Screen Plate Design / New Equipment Technologies and Chip Screening System Designs Improve Control of Fines and Pins Content / Improved Fibrillation of the Long Fibre Fraction of a Commercially Produced PGW, By Improvements of the Water Supply of the Grinding Zone / New Technology in PGW-Screening Improves Pulp Quality and Reduces Energy Consumption / High Speed Photography of Pulp Flow Patterns in a 5 MW Pressurized Refiner / Relation Between Mechanical Properties of Pulp Fibers and the Activation Energy of Softening as Affected by Sulfonation / Aspects of Mechanical Pulp Fibre Separation and Development in a Disc Refiner / Low Frequency Refining - A New Way to Make Mechanical Pulp The Flow of Pulp in Chip Refiners / Improving the Reliability of Pulp quality Data Through Factor Analysis and Data Reconciliation / Development of Control Systems in Mechanical Pulping (GW, TMP) at Rauma / Comparison Between Different Species of Softwood as TMP Raw Material / Economic Assessment of Biomechanical Pulping
Call_No. :
TS1109.I516 1989 V.6A
Title:
Pulp & Paper Industry Corrosion Problems, V.6A The Proceedings of the 60th International Symposium on Corrosion in the Pulp & Paper Industry
Author:
International Symposium on Corrosion in the Pulp and Paper Industry (6Th : 1989 : Helsinki, August 29-September 1, 1989)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
Kraft Digesters / Corrosion Monitoring and Control / Recovery Boilers/Material Selection / Bleaching/Paper Machines / Materials
Call_No. :
TS1109.I516 1989 V.6B
Title:
Pulp & Paper Industry Corrosion Problems, V.6B The Proceedings of the 60th International Symposium on Corrosion in the Pulp & Paper Industry
Author:
International Symposium on Corrosion in the Pulp and Paper Industry (6Th : 1989 : Helsinki, August 29-September 1, 1989)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
Kraft Digesters / Corrosion Monitoring and Control / Recovery Boilers / Material Selection / Bleaching / Paper Machines / Materials
Call_No. :
TS1176.4.N6 N650 1987 N.18
Title:
Nonwood Plant Fibers Pulping : Progress Report 18
Author:
Technical Association of the Pulp and Paper Industry
Publisher:
Technical Association of the Pulp and paper Industry, Atlanta, GA.
Contents:
Rice Straw Pulping and Bleaching / The Bagatex - 20 Process for Rapid Drying and Preservation of Bagasse in Large Bales by Accelerated and Controlled Fermentation / Stabilization of Jute Fibers Against Photodiscoloration / Kenaf Lignin Structure by Correlation of CMR, FTIR and Chemical Analysis / Bagasse Pulping in a Continuous Digester for Bleachable Grades / Structural Changes of Lignin in Soda and Soda - Aq Delignification of Wheat Straw / Influence of Bagasse Pulp digestion on the Whole Yield and Properties of Bleached Pulps / The Effect of Gibberellic Acid on the Growth and Pulp Properties of Kenaf / Two Stage Acid Hydrolysis of Bagasse under Atmospheric Pressure Conditions / Quality of Effluents from the Neutral Sulphite Pulping of Oilseed and Linen Flax Fibres / Continuous Processing of Cotton Linters by Soda Cooking or Oxygen Cooking and Horizontal Belt Washing / Soda Pulping Studies on Sesbania Sesban - The Overall Reaction Pattern / Critical Analysis of Straw Pulping Methods - World Wide / Soda Oxygen Pulping of Rye Straw / NPO (Neutral Hydrogen Peroxide - Oxalate Pulp) Prepared from Bast Fiber / Conversion Factors for SI Units
Call_No. :
TS1025.A2 1986
Title:
EUCEPA Symposium Helsinki : Environmental Protection in the 90'S Proceedings
Author:
The Finnish Pulp and Paper Research Institute and The Finnish Paper Engineers' Association
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland and The Finnish Paper Engineers' Association
Contents:
Economic Aspects of Environmental Protection; Goals and future Trends / Environmental Effect of Effluents an Air Emissions / Process Modifications / Treatment of Effluents, Wastes and Air Emissions
Call_No. :
TS1176.4.N6 N650 1986 N.17
Title:
Nonwood Plant Fibers Pulping : Progress Report 17
Author:
Technical Association of the Pulp and Paper Industry
Publisher:
Technical Association of the Pulp and paper Industry, Atlanta, GA.
Contents:
Beloit-SPB Process Achieves the Breakthrough in Bagasse Newsprint / Bagasse Newsprint - Development of Beloit - SPB Process from Concept through Pilot-Plant, Commercial Trials / Our Start Up Experiences in Newsprint Mill Based on Bagasse / Neutral Sulphite Pulping of Oilseed Flax and Textile Linen Flax Fibers / Operation at Adamjee Paper and Board Mills Ltd. - A Variety of Raw Materials / Experience in Establishing and Operating a New Bagasse Mill / TMP and CTMP Bagasse Pulp Experienced from Mexican Fiberboard Mill / KK MDF, The First Bagasse MDF Board Plant / Critical Factors to be Considered in Production of Bagasse Newsprint and the Necessary High Yield Mechanical Pulp Required / Kinetics and Mechanism of Delignification in Neutral Sodium Sulfite Cooking of Wheat Straw / Bleaching Characteristics of Wheat Straw Pulp / Industrial Experience in the Semichemical Pulping of Straw / Soda Oxygen Antraquinone Pulping of Wheat Straw / Mechano Chemical Depithing of Bagasse / High Yield Kraft Pulping of Bamboo / Studies on Parthenium Hysterophorus as a Source of Paper-Making Fiber
Call_No. :
TS1176.6 1980
Title:
Eucepa Symposium : Abstracts
Author:
The Finnish Pulp and Paper Research Institute and The Finnish Paper Engineers' Association
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland and The Finnish Paper Engineers' Association
Contents:
Restrictions Imposed by Environment Impact and Energy Problems / Chemistry of Delignification / Extended Delignification by Combination of Modified Kraft Pulping and Oxygen Bleaching / The Chemistry of Oxygen Delignification / Oxygen Stage in Sulphite Process / Oxygen Bleaching Under Different Consistencies / Reduction of the Emission of Odorous Compounds in Chemical Pulping / Co-Products and Environmental Protection / Delignifizierende Bleaiche Von Sulfitzellstoffen MIT Wasserstoffperoxid / Aims for the Development of Recovery Methods / Additives as cooking Aids / The Reaction Mechanisms of Anthraquinone in Alkaline Pulping / A Mill Trial with Addition of a Small Amount of AQ to Kraft and Polysulfide Pulping / Some Methods for Acceleration of Soda Delignification / Pulping Processes Based on Autocausticizable Borate / Extensive Delignification Through Controlled Liquor Concentrations / Soda-Oxygen Pulping / Alkali-Oxygen Pulping of some Central - European Wood Species / Raw Materials and Pulp Quality Requirements in the Future / Why Delignify? / Effect of Chemical Modification on the Properties of Lignin-Containing Fibers / Oxidative Delignification of Mechanically Fiberized Pulp / Delignification Des Pates Soude-Anthraquinone Par Leperoxyde D'hydrogene - Precede ALCAPER / Reductive Delignification: Past Experience and Current Concepts Delignification and Other Potential Applications of Bioligninolytic Systems in the Pulp and Paper Industry / Organosolv Pulping / Future Development of Industrial Pulping Processes
Call_No. :
TS1176.6 1980 V.1
Title:
Eucepa Symposium, V.1 Manuscripts
Author:
The Finnish Pulp and Paper Research Institute and The Finnish Paper Engineers' Association
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland and The Finnish Paper Engineers' Association
Contents:
Restrictions Imposed by Environment Impact and Energy Problems / Chemistry of Delignification / Extended Delignification by Combination of Modified Kraft Pulping and Oxygen Bleaching / The Chemistry of Oxygen Delignification / Oxygen Stage in Sulphite Process / Oxygen Bleaching Under Different Consistencies
Call_No. :
TS1176.6 1980 V.3
Title:
Eucepa Symposium, V.3 Manuscripts
Author:
The Finnish Pulp and Paper Research Institute and The Finnish Paper Engineers' Association
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland and The Finnish Paper Engineers' Association
Contents:
Raw Materials and Pulp Quality Requirements in the Future / Why Delignify? / Effect of Chemical Modification on the Properties of Lignin-Containing Fibers / Oxidative Delignification of Mechanically Fiberized Pulp / Delignification Des Pates Soude-Anthraquinone Par Leperoxyde D'hydrogene - Precede ALCAPER / Reductive Delignification: Past Experience and Current Concepts Delignification and Other Potential Applications of Bioligninolytic Systems in the Pulp and Paper Industry / Organosolv Pulping / Future Development of Industrial Pulping Processes
Call_No. :
TS1176.6 1980 V.4
Title:
Eucepa Symposium, V.4 Opening Addresses
Author:
The Finnish Pulp and Paper Research Institute and The Finnish Paper Engineers' Association
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland and The Finnish Paper Engineers' Association
Contents:
Welcome - Are We Ready / Factors Influencing the Choice of the Delignification Process / The Design of the Fibre Line of the Future Pulp Mill / Opening of the Exhibition
Call_No. :
TS1176.6 1980 V.2
Title:
Eucepa Symposium, V2 Manuscripts
Author:
The Finnish Pulp and Paper Research Institute and The Finnish Paper Engineers' Association
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland and The Finnish Paper Engineers' Association
Contents:
Reduction of the Emission of Odorous Compounds in Chemical Pulping / Co-Products and Environmental Protection / Delignifizierende Bleaiche Von Sulfitzellstoffen MIT Wasserstoffperoxid / Aims for the Development of Recovery Methods / Additives as cooking Aids / The Reaction Mechanisms of Anthraquinone in Alkaline Pulping / A Mill Trial with Addition of a Small Amount of AQ to Kraft and Polysulfide Pulping / Some Methods for Acceleration of Soda Delignification / Pulping Processes Based on Autocausticizable Borate / Extensive Delignification Through Controlled Liquor Concentrations / Soda-Oxygen Pulping / Alkali-Oxygen Pulping of some Central - European Wood Species
Call_No. :
TS117.6.M4 I57 1977 V.1
Title:
International Mechanical Pulping Conference Helsinki, V.1 New Competitive Furnishes For Paper making
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
Basic Wood Raw Material Properties and Their Significance in Mechanical Pulping / TMP - A Potential Use of a Wider Range of Raw Material / Refiner Pulp from P. Radiate / Scots Pine as Raw Material in Theorem-Mechanical Pulping / Mechanical Pulping of Southern Pines - Present Status / Influence of Chip Moisture in Mechanical Pulping / TMP - Key to Development of Mechanical Book Papers from a Tropical Hardwood - Gmelina arboreal
Call_No. :
TS117.6.M4 I57 1977 V.2
Title:
International Mechanical Pulping Conference Helsinki, V.2 New Competitive Furnishes For Paper making
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
Enviromental Impacts of Mechanical Pulping
Call_No. :
TS117.6.M4 I57 1977 V.3
Title:
International Mechanical Pulping Conference Helsinki, V.3 New Competitive Furnishes For Paper making
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
The Boundary Conditions for the use of New Furnishes on High Speed Paper Machines / On the Operation of Hallsta PM 12 with TMP / Modified Thermomechanical Pulp in Newsprint Furnishes / Methods of Improving the Printability Properties of TMP / Practical Experience with the Application of TMP Papers to Different Printing Methods / Towards a Lint-Free Newsprint Shee / hermomechanical Pulp as a Furnish Component of Offset Newsprint / Offset Printing Properties of TMP and Conventional Newsprint / Thermomechanical Pulp or Stone Groundwood? Economics in the Manufacture of Different Paper Grades / Evaluation of TMP from and Economic and Raw Material Point of View / Market Mechanical Pulps / Quality Variations in Fluffed End-Products Due to the Quality of the Mechanical Pulp / Mechanical Pulping with a Sequential Velocity Refiner - A New Concept / Refiner Mechanical Pulping for High Speed Newsprint / The Donnacona T.M.R. System - Two Years After Startup / Dynamic Disc Misalignment in a Chip Refiner / The use of TMP in LW newsprint / Experiences of the Control Systems in the Grindery and Thermomechanical Refinery of the Summa Mills
Call_No. :
TS117.6.M4 I57 1977 V.4
Title:
International Mechanical Pulping Conference Helsinki, V.4 New Competitive Furnishes For Paper making
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
Opening of the Conference / Opening of the Exhibition
Call_No. :
TS117.6.M4 I57 1977 V.5
Title:
International Mechanical Pulping Conference Helsinki, V.5 New Competitive Furnishes For Paper making
Author:
International Mechanical Pulping Conference (1989 : Helsinki, Finland)
Publisher:
The Finnish Pulp and Paper Research Institute, Helsinki, Finland
Contents:
Stone Groundwood - The Lowest Cost Mechanical Pulp / Present Status of Modern Stone Groundwood Process / The Defibrator Thermofiner System / Single Stage TMP and RMP with New Type Feeders in Enso-Bauer Refiners / Beloit-Jones TMP Pilot Plant Studies / Process Control - Large Horse-Power Thermal Mechanical Pulping Systems / Chemical Pretreatment for Termo-Mechanical Pulp / The STFI Long-Fibre Content Meter and Its Process Applications / Digital Process Control For Thermomechanical Pulp (TMP) Plant / Viewpoints on Screening and Cleaning of Mechanical Pulps / Screening of Thermomechaical / Recovery of Heat Generated in the Refining of Thermomechanical Pulp / Heat Recovery Systems for Thermomechanical Pulping Installation
Call_No. :
TS1121.I574.1 1974
Title:
The SSVL Environmental Care Project: Technical Summary
Author:
The Swedish Steam Users' Association, Information Department
Publisher:
Brolins Offset, Stockholm
Contents:
Resume of the Project / Organization of the Project / The Structure and Location of the Swedich Forest Products Industry and its Environmental Implications / The Kraft Process / Bleaching of Kraft and Sulphite Pulps / Liquid and Chemical Balances / The Sulphite Process / Papermaking / Manufacture of Fibre Building Boards / Temporary and Accidental discharges / Barking / External Treatment / Sludge / Supervision of Discharges
Call_No. :
TS1120.B1 1972
Title:
Man-Made Polymers in Papermaking
Author:
The Finnish Paper Engineer's Association and The Finnish Pulp and Paper Research Institute
Publisher:
The Finnish Paper Engineer's Assoc. & The Finnish Pulp and Paper Res. Inst.
Contents:
Synthetic Resins in Stock Preparation / Synthetic Pulp for Papermaking / Webs of Man-Made Fibres / Manufacture and Properties of Synthetic Paper Films