FLEXI PLA-FIT GT-1 SPEC SHEET
Spec. Rev. Date:7/1/99

CLASS NAME: FLEXI PLA-FIT GT-1
GOVERNING BODY:CenCal IMCA (Central California International Micro Car Association)
CLASS CONCEPT: Enduro Championship Race Series (all driver classes combined)




GENERAL:
1) All components must be available from distributors or manufacturers "over-the-counter" a minimum of one month prior to use in a competition event.

MOTOR:

-Type:

Pla-Fit "Cheetah" (80%)

-Notes:

1) Lead wires may be replaced

2) Motor may be ground to clear axle/bushing

3) Shaft may be shortened

4) Motor may not show evidence of being opened or modified

5) NO OTHER MODIFICATIONS NEEDED

CHASSIS:

-Type:

Champion "Turbo-Flex/Astro" or Parma "Flexi 2/3", NO light -weight pans allowed

-Bearings:

Any bushing or oilite (No ball bearings allowed)

-Front wheels/tires:

Black tires, .500" dia minimum, mounted to chassis within 20 deg. of vertical

-Rear wheels/tires:

Black tires, .810" width maximum

-Axles:

Any type front allowed, rear must be solid steel (No lightweight drilled or filled axles), flats OK

-Gears:

Any size and pitch allowed but spur gear must remain above lower surface of chassis

-Ground Clearance:

No Minimum

-Notes:

1) May reinforce rear with straight or U-brace and may add a fwd. and/or aft motor brace

2) Motor mount holes may be enlarged for bearing & pinion clearance

3) Rear axle may be leveled / lowered

4) NO OTHER MODIFICATIONS ALLOWED

BODY:

-Type:

Any GT-1 body,.062" (1/16 minimum vertical body component must be retained below fold-line at front (diaplane may be removed)

-Max. Height:

1.625" (1 5/8")

-Max. Width:

3.25" (3 1/4") maximum (not including pins/clips)

-Notes:

1) Front wheel wells must be clear or cutout, windows must be clear

2) Paint must be opaque (not "see-through"), local clear areas (for realism) allowed

3) Body & interior must cover all of chassis (including guide &tires) when viewed from above

4) Rear body may be cut-out (side fender behind rear must remain

5) Must have detailed / painted scale (not "flat") driver

6) Must have 3 scale appearing numbers (other decals and body detailing are encouraged)

7) Any additional cut-outs, holes or slots must be per the original car (pictures reqired) or per molded-in body details